KevinJamesNg

Traveling through time and space & Doing timey wimy stuff.

 

 

Tianhe-1 is the mainframe infrastructure core module of China’s CNSA- Next Generation Space Station has been revealed and China hopes to finish the space station around 2022. In which During the 2019 launch calendar of CNSA – China National Space Administration, the Chinese Space Agency in Belt and Road initiative  Alliances with the ESA- European Space Agency also with United Nations Outer Space Affairs, ROSCOMOS in developing the next Country’s Space Station in which are currently finalizing their various modules component construction in which contain in that construction experimental modules in which it’ll be carried onwardly with the Long March 5B,  in which it’ll be the first time the CNSA they will launch the Heavy modified Long March 5B into space..  Into a Launching Low Earth Orbit in a in between Attitude of 350 to 450 Kilometers above Earth’s orbital inclination of forty two too forty three Degrees…

Launching from Launch Complex one, Wenchang Satellite Launch Center, Hainan in the first quarter calendar is the first foundation core module of the Tianhe- Harmony of Heavens…. Among with the Space Alliance with CNSA taking the lead, is ESA, Russian ROSCOMOS also the United Nations Outer Space Affairs Office among with the Belt and Road initiative countries in developing preparing together for deep space missions and manned mission to towards the moon and Mars…  ESA will have their module up with the Chinese module components in building up connecting with the Tianhe unit in which like the very aged Zarya needs replacing on the NASA’s international Space Station….

CNSA- Tainhe 1 core module.. in preparations for the 2019 launch calendar..

Built, constructed, engineered  in the one of many China’s industrial innovations engineering cap cities, in Aerospace Town, Tianjin City in Manchurian Province- North East China plus various other module components are also built with the twin experimental modules that’s connecting the Tainhe-1 core module…..in which is purpose is to be the master hub, living Environmental  quarters….. Tainhe will provided the environmental life support, living quarters with three crew members also it’ll provide the main bridge of the Space Station with Navigational Guidance’s controls in which that compartment is one of three compartments of the station the second the non-habitable service section, then the docking section hub unit.. the primary Environmental living section consisting of living quarters, kitchen, toilet, fire control equipment Atmospheric processing providing control equipment, computers with scientific, multiple purpose communications installations.. Also with a small Remote Manipulate Robotic MIR Lyappa Arm to assist in adjoining the other five further modules that have yet to arrive in completing the first stage of the station…… the Docking mechanism is compatible with the Russian also ESA’s aswell due that that the International Space Station is based on the ROSCOMOS’s Mir Space Station Design in which formalised docking mechanism standards..  As the Tianhe is constructed it’s too first to house three selected Taikonauts, Cosmonauts, and European Space Agency Astronauts as the station grows with more module it can accommodate more to its design criteria limit..

In which current various major innovation have been researched, development and impendent… in which advanced interactive RMS- Remote Manipulator System in which have more capabilities than NASA’s ISS-International Space Station in which is known as the Canadian arm design and built by the CSA-Canadian Space Agency , the CNSA RMS Remote arm has the same features of a human hand in which can perform more of an intricate delicate task with sensor feedback sensors so Taikonauts gets to feel in real time of various task that they’re performing.. This RMS system small Remote Manipulate Robotic MIR Lyappa Arm to assist in adjoining the other five further modules that have yet to arrive in completing the first stage of the station that was experimented with Tiangong Two to refine, learn if any given modifications that need to be required for the next mission task…

Once the Tainhe-1 connected modules are installed it can be connected with the Transport vehicle’s such as the current or next Generation of Shenzhou… or it can be attached with CNSA’s next generation Space Shuttle plane variant that’s in current development in which provide more of the work truck in doing more heavy tasking..  In which the CNSA Space Station can handle two Shuttle variants, one Shenzhou variant transport….

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: