#CNSA #ChinaNationalSpaceAdministration #国家航天局 |#BRI #June2023 |#北京 #中國 #中国科学技术馆 #Beijing #ChinaScienceAndTechnologyMuseum – Tiangong -#ChinaSpaceStation -The #天和; #TianheCoreModule structural parts…… #InternationalMuseum

The China Science and Technology Museum 中国科学技术馆, established in 1988 in Beijing, China, People’s Republic of China is “the only comprehensive museum of science and technology at national level in China” according to the official website of the Beijing government The museum at its current site houses both permanent and temporary exhibitions. It has many facilities for science popularization (classrooms, laboratories, lecture halls, etc.) including four special-effect theatres The museum is located in the Beijing Olympic Village, near the Olympic Green station of the Beijing Subway…  China, Bei Jing Shi, Chaoyang, 北辰东路5 邮政编码: 100101, Beijing, China, People’s Republic of China.

In preparation for Beijing’s 2008 Summer Olympics, construction of new buildings for the museum began at the Olympic site in 2006. The new museum opened in September, 2009, having been expanded from its previous 40,000 square meters to 48,000 square meters. The previous museum site was closed for several years before undergoing renovation and expansion beginning in 2016. On 15 September 2018, the old science museum reopened as Beijing Science Center…

The Tianhe core module structural parts in the China Science and Technology Museum may be the best spacecraft exhibit open to the public for close viewing in China. All the external details can be seen at a glance, and some sections are also displayed. Space fans absolutely hooked. What’s more interesting is that it is located outside the paid area of ​​the west entrance hall of the Science and Technology Museum, so you can actually visit it without making an appointment to buy tickets. It is very cost-effective and highly recommended.

However, when I went there last week, the docking device at the front of the node cabin was removed for some reason. The original appearance can be seen in here
detailed pictures are released here for those who cannot go to watch it in person. The main content is Yes:


Figure 1-3: Overview


Figure 4-9: Various rendezvous and docking equipment in the node cabin


Figure 10-11: Appearance of the second/fourth quadrant of the large column section

Figure 12: Structure of the rear fuel tank


Figure 13-15: Solar wing deployment Device


Figure 16: Target Adapter for Large Robotic Arm


Figure 17: Floodlight


Figure 18: Control Moment Gyro in the Fourth Quadrant and Panoramic Camera A on it (the one that the space station is lifted out of the space station for the first time)

In addition, the verification documents and the original version of this structure A little bit different

Images and visuals are from their respectives

#CNSA #ChinaNationalSpaceAdministration #国家航天局 |#BeltAndRoadinitiative #November2021| #CMS #ChinaMannedSpace the crew #Shenzhou13 #Takionaut #SpaceTeacher #王亞平 #WangYaping does relaxing also  teaching onboard the  #CSS #ChinaSpaceStation #TianheCoreModule ….

中国空间站 On 8th  November 2021 Hong Kong SAR – Beijing Time  morning, the Belt and Road Initiative CNSA –China National Space Administration  CSS China Space Station in which on a three to six months setting up a new home of the first three Shenzhou 13 in which spending up to on for the further construction and verifications of the systems of the CSS –China Space Station 2021 launch calendar in which currently the three Takionauts current Shenzhou 13 ……  Preparations for the six months of extension of the China Space Station  In which the currently it remains awaiting for the crew of setting up home in conducting fun scientifically onboard中国空间站..  China Space station …..

Today on the 24th November 2021, Wednesday Official release by China Manned Space Engineering Office Shenzhou 13 crew member Takionaut王亞平 Wang Yaping in CNSA –China Space Station in which during the one month of six month duration onboard preparations of expansion of the China Space Station components modules in which are coming up. Wang Yaping’s on-orbit photos are here! In just over a month, Wang Yaping not only completed all kinds of in-orbit work as planned, but also became China’s first female astronaut out of the cabin. Today, Zhai Zhigang and Ye Guangfu officially released the in-orbit photos taken by Mr. Yaping! 

Today, the China Manned Space Engineering Office officially released the photos of Wang Yaping on the space station. The photographers are Zhai Zhigang and Ye Guangfu from the 13th crew of the Shenzhou 13 The teacher may look cute lovely  Takionaut Wang Yaping, Photography by Zhai Zhigang and Ye Guangfu shot from under different situations in the core module of the Tianhe Core Module as they spend some relaxing time experimenting with different asspects of photography equipment..

Images and visuals are from Weibo also their respectives.

#STARTREKONLINE | #FirstContactDay #StarTrek – it’s about that Magic carpet ride song and the Phoenix back in that 5th April Montana… 2063…….!

[Riker, LaForge and Cochrane have made humanity’s first warp speed test flight]
Dr. Zefram Cochrane: Is that Earth?
Lieutenant Commander Geordi La Forge: That’s it!
Dr. Zefram Cochrane: It’s so small…
Cmdr. William Riker: It’s about to get a whole lot bigger.

On a post war torn rebuilding planet on Earth on 5th April 2063… it’s the day that Zefram Cochrane (James Cromwell) among with further interesting two crew mates whom he recently just met  from the USS Enterprise-E whom travel past in time to 2063 to the year of the first contact, in between human race also the having that very integral  critical part in history  in where Humanity has evolved. …

As part of the Celebrations on Star Trek Online- is having First Contact Day” in which you can recreated that scene in building your very own Phoenix warp Ship and watching it in flight, in creating that moment in history.. At the Zefram Cochrane Memorial Historical Museum.. From 9AM PST 30th March –Thursday to 10AM PST 6th April 2017…….

One off the various activities at the Zefram Cochrane Memorial Historical Museum in Montana, is finding various component parts, that are important in constructing the Phoenix, like hull assembly, engine construction, various parts to fabricate the stabilizers, also its not finding parts that important its finding the best parts that contribute to your Phoenix in making it launch higher attitude than the others that are also competing among you.. in which winning whom makes your Phoenix awardingly you has the Honorary Student of the great Zefram Cochrane

BACK TO THE FUTURE | your very own wearable flux capacitor watch….?

think geek _ Back to the Future- wearable flux capacitor watch

Given that you have Captain Jack Harkness wearable wrist worn “Vortex manipulator”… in which will help you to go anywhere in time and space..  Then this might be good to know to have a backup.. Like this “wearable retro flux capacitor watch”…  in case you lost in the tower in London with UNIT…  only going forward and back in time though..

Having it lovely encased as a wearable watch, it’s casing is in Stainless Steel with the same brush texturing like drivable modify DMC Delorean… It has the LCD like dials that featured on the De lorean’s console… In showing the time, the main display with the animated working Flux capacitor charging up… in which makes a good makeshift night light… it as mode it can display random dates like that preparing to run into…

The wearable flux capacitor watch is portionally sized in  approx. 1.4″ x 1.9″ x 0.7″ given its size it’s an everyday watch as you wear it fashionably with, also the strap is adjustable so if you go in to your local watch smith, or jeweller they could adjust size for your wrist size..