#MadeInChina #中國製造 #中國 | #东方空间 #OrienSpace #November2023 | Developing Assembling  to launch the adorable cute #引力一号 #GravityOne Yao 1 Carrier Rocket planned for first sea flight in #December2023..

东方空间 OrienSpace is one of sixty plus Carrier Rocket Companies in Made In China, People’s Republic of China.. Located in headquartered in Beijing, B3, Digital Manor, No. 1 Disheng West Road, Yizhuang Economic and Technological Development Zone, Daxing District, Beijing………Shandong Address: No. 30, Nanjing Street, Economic Development Zone, Haiyang City, Yantai City, Shandong Province………Shaanxi Address: 4th Floor, Northwest Building, Eleven Science and Technology, National Civil Aerospace Industry Base, Xi’an, Shaanxi Province…….Hainan Address: Room 125, 1st Floor, Building 20, No. 169, Wenwei Road, Wencheng Town, Wenchang City, Hainan Province…

Established in 2020, Dongfang Space is mainly engaged in space transportation. It is a design and manufacturing service company for launch vehicles and new aerospace vehicles. Through the research and development of the “Gravity” series of launch vehicles, the company has created serialized, diversified, and flight-based aerospace transportation products such as one-time use, recyclable reuse, and manned flight, and quickly formed low-cost, large-scale, and convenient launches. Service capability, committed to becoming the world’s most respected provider of commercial aerospace products and launch services, so that everyone can realize the dream of spaceflight…….

The actual shape of this bevel cone seems to be a bit sharper than the one in the animation and model?

[The Orient Space Gravity-1 launch vehicle plans to make its first flight at the Oriental Space Port in December this year] Orient Space’s first “Gravity-1” launch vehicle will make its first flight at the Oriental Space Port in Yantai, Shandong in December this year. Aiming at the demand for rapid launch services of low-orbit constellations and medium- and large-scale satellites, the low-Earth orbit carrying capacity of “Gravity-1” is as high as 6.5 tons, which will increase the capacity of the largest commercial space rocket in China by about three times and will effectively help my country improve its medium- and large-scale satellites. Space payload rapid response launch capability.

“Gravity-1” is China’s first commercial space rocket with a bundled design and the world’s first all-solid bundled rocket. The rocket has a three-stage and semi-configuration. The booster stage is bundled with four solid motors. Each unit is more than 10 meters in height, 2.65 meters in diameter, and has a thrust of up to 155 tons. It will provide 600 tons of thrust for the rocket to take off, making the “gravity force” -1″ can achieve a low-Earth orbit carrying capacity of up to 6.5 tons…

Images and visuals are from their respectives also 东方空间 OrienSpace

#MadeInChina #中國製造| #中科宇航 #ZhongkeAerospace #ChinaAcademyOfScience  #CASSPace #April2023  | the Launching #ReusableCarrierRocket Cute Adorable scale Prototype launch vehicle Testing on Ground launching also Marine Sea Launching at One Kilometer more towards Landing …………..

Beijing Zhongke Aerospace Exploration Technology Co., Ltd. is the first domestic aerospace enterprise with mixed ownership, and it is also the target enterprise that Oriental Aerospace Port focuses on introducing. Relying on the scientific research strength and resource advantages of the Institute of Mechanics of the Chinese Academy of Sciences and the Aerospace Flight Technology Center of the Chinese Academy of Sciences, China Aerospace Science and Technology has been committed to the research and development and integration of space technology and aerospace vehicles as a platform for the transformation of major national scientific research projects, as well as the transformation and provision of technological achievements. Aerospace launch service. The Lijian-1 rocket project also adds a brand-new name card to the Oriental Space Port, which will surely promote the construction of the Oriental Space Port to take a solid step forward.

Zhongke Aerospace successfully completed the vertical recovery flight test at sea From January to March, Zhongke Aerospace continued to conduct vertical recovery demonstration and verification flight tests in Haiyang, Shandong, and successively carried out land launch recovery and sea recovery.

The vertical recovery principle prototype of Zhongke Aerospace launch vehicle, which successfully completed the flight test this time, is used as a technology verification platform. At the beginning of the scheme design, it has adhered to the innovative design concept and adopted the integrated control system of power supply and distribution-control-telemetry Design and 3D printing design and process the anti-sway storage tank, and adopt a lightweight carbon fibre structure to realize the integrated configuration of bearing-force transmission-vibration suppression, which can integrate and reuse the functions of multiple systems, greatly simplifying the overall quality Connected with cables, it can be applied in similar miniaturized aircraft.

The complete success of the demonstration test of the vertical recovery principle prototype of the Zhongke Aerospace Launch Vehicle at sea has verified a number of key technologies. The success of the flight test will carry out technical research and accumulation for the near-space recyclable scientific experiment platform, the sub-stage recovery of the orbiting rocket, and the space tourism vehicle, which will be applied in subsequent models and sub-stage recovery missions of the orbiting rocket.

The whole flight test simulates and verifies the flight process of launch on land and recovery at sea, mainly to verify the process of landing at sea during the recovery process of the sub-stage rocket into orbit, and the communication and relative measurement technology under the influence of sea clutter environment. The landing accuracy of the Kilometer-level flight environment and the shaking of the offshore landing platform will be assessed. The maximum flight altitude is greater than 1000m. After flying to the highest point, adjust the attitude and descend after hovering. The descending section is decelerated by the reverse thrust of the engine, so that the speed of the aircraft can be reduced below 2m/s when approaching the landing platform at sea, and then through the buffer legs Realize soft landing, the whole flight takes about 10 minutes, and the landing point accuracy is better than 10m.

In terms of vertical return high-precision guidance and control technology, the re-entry and return high-precision navigation and positioning technology, the powered vertical recovery online trajectory generation guidance technology for the prototype of the carrying principle, the adaptive flight control technology for complex environments, and the initial alignment of offshore shaking platforms And long-term tracking technology, the verification work of semi-physical verification technology for the whole flight…

Images and visuals are from Weibo and their respectives

#MadeInChina #LinkSpace #翎客航天 | #LinkSpaceChina #ReusableCarrierRocket #insta360OneX – Successfully Testing the #RLVT5 hover flight testing August 2019 lift off and pad landing making another third historic #milestone..

On the first weeks of 10th August 2019 , Link Space Aerospace Technology, a Beijing based Private Space Commercial Company among sixty more in China.. have successfully tested there small version of what’s to come with an larger reusable carrier rocket that’s set out to become like of Space X Falcon Nine Reusable, also its heavier variants, among in the reusable Carrier Rocket Development is the next generation of CNSA- China National Space Administration Heavier Long March  reusable Carrier in the eight, nine series of their third milestone launch and landing of the RL 客航天RLV-T5 model Reusable Carrier rocket test article in which is the platform of their three new larger series of reusable carrier Rockets

Successfully testing lift off at a height of Apogee 300.2 Meters and recovery  point of 0.07 meters  in which holding landing in which the coverage was recorded on an Insta360 One X, on to an LinkSpace X circular launch and land pad at which LinkSpace has built flying vertical-take-off/vertical-landing (VTVL) prototype test rockets, to develop its reusable rocket technology. By July 2016, it achieved hover flight with a single-engine thrust-vectored rocket. By September 2017, it had built three hovering rockets, tested in Shandong Province….

Learning from the second and first testing articles, the third was advanced and improved to which new breakthroughs were developing tested with focusing on the neural network based guidance and control technology and new technologies such as improving ballistics and guiding and high speed precision position systems.

Credit Images and visuals are from Weibo –  Link Space Aerospace Technology

#MadeInChina #LinkSpace #翎客航天 | #LinkSpaceChina #ReusableCarrierRocket – Successfully Testing the #RLVT5 hover flight testing in a live lift off and pad landing making historic #milestone..

Link Space Aerospace Technology- Medium Reusable carrier rockets..

On a very spring day of 27th March 2019 LinkSpace in which is among sixty more Private Space Companies in China …. Link Space Aerospace Technology, a Beijing based Private Space Commercial Company among sixty more in China.. have successfully tested there small version of what’s to come with an larger reusable carrier rocket that’s set out to become like of Space X Falcon Nine Reusable, also its heavier variants, among in the reusable Carrier Rocket Development is the next generation of CNSA- China National Space Administration Heavier Long March  reusable Carrier in the eight, nine series..

 On July 2016 the company have achieved the required means of Rocket retro Technologies, on using a single vector control engine…  in which leading to controlling engine thrust on recovering the Carrier Rocket stage to reused again to lower the cost involved in sending a payload into orbital means on the same launched design heritage among Space X , Blue Origins…..located in heart of Beijing Economic Technological Development Area… also they located in the Beijing, Guangdong, Shandong, Shaanxi ..

During the early this year they successful tested a short range smaller scale of the initial size of their carrier rocket from VT-VL- Vertical Take-off towards Vertical- Landing…  at their testing facilities in which they being Home Made designing since founded on 2014 January  from many whom worked within the Aerospace and space industry in China..

They recent been featured in the Hangzhou Technological innovation conference in a three day event show casing their startup n Reusable carrier Rockets in which the design lineages is Akin but Home grown too the same aspects of SpaceX Reusable Carrier Rockets..  There evolution is towards to multiple staging reusable Carrier Rockets…  as to that as part to that the company plans to manufacture micro and cube satellites communications or variant purpose designs satellites in Subsidiaries Company as all the components of the Space Link Aerospace is built in house..   As there carrier Rocket becomes commercially it can transport at 200 Kg payload satellite into five Hundred Kilometers attitude …..The primary propulsion system of their RLV-T3 Carrier Rocket is primary a liquid-solid engine combination design

 On that day Link Space Aerospace Technology have successfully test launched untethered their new experimental reusable Carrier Rocket on its testing firing its launch on its newly acquired launch pad marked “Welcome to Earth” on that day it launched to an experimental height in which test its capabilities un tendered to which It launched successfully then it was on a holding height for a few minutes more till it was time to land on the same location where it launched from.. in which landed comfortably…  it was observed by Doctor Robert Zubrin  whom witness the milestone perfect landing in which will leading to a newer design New line Baby the RLV-T5 series in which will launched further with higher achiever