#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #July2023 |#Tianhuo12 #TH12-  100-ton liquid #ReusableCarrierRocketEngine  #ReusableCarrierRocketEngine first flight status and long-range thermal test of the whole system were successfully completed….

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

[Tianbing Technology’s 100-ton liquid rocket engine first flight status and long-range thermal test of the whole system were successfully completed] Recently on the week on 24th July 2023 , Tianhuo 12 (hereinafter referred to as TH-12), a 110-ton thrust liquid oxygen kerosene rocket engine “Tianhuo 12” (hereinafter referred to as TH-12), a large liquid carrier rocket of Tianbing Technology, successfully completed the long-range thermal test of the whole system.

During the test run, the engine started quickly, worked smoothly, and shut down normally. The data shows that the engine works stably for a long time under the rated working conditions, and various performance indicators meet the design requirements and meet the rocket flight requirements.


The Tianhuo 12  is specifically  designated towards the  Reusable Carrier Rocket Tianlong-2 medium-sized liquid carrier rocket independently developed by Tianbing Technology successfully made its maiden flight. This is the first private liquid rocket in China. On the basis of the successful launch, Tianbing Technology independently developed the Tianlong-3 large liquid launch vehicle. Compared with the Tianlong-2 rocket, the Tianlong-3 rocket has a greater carrying capacity. The self-developed 100-ton Tianhuo 12 liquid oxygen kerosene rocket engine has passed the test run of the whole system under various working conditions.

Through multiple long-range hot test runs under rated conditions, the following goals have been achieved:

1) The correctness of the engine design state has been verified.
The test results have proved that all key technologies such as air-conditioning multiple start technology, self-ignition ignition technology, combustion instability suppression technology, super-large thrust chamber 3D printing manufacturing technology and turbine disk thermal component 3D printing technology have made breakthroughs, and the design state of the engine has been completely determined.
2) The correctness of the engine batch production process was verified.


This test product is the first set of products to be mass-produced and manufactured relying on social resources, which marks that the low-cost manufacturing routes such as the engine manufacturing process plan, process flow, and production organization model have been verified. It can be fully transferred to the mass production and delivery stage of 40 engines.

Tianlong-3 is the first large-scale liquid launch vehicle in my country’s commercial aerospace field, which will greatly enhance the carrying capacity of my country’s commercial spaceflight. The power system of Tianlong-3 adopts a fully self-developed TH-12 liquid oxygen kerosene rocket engine, with a design thrust of 110 tons and a thrust-to-weight ratio of 163.

The TH-12 engine has deep variable thrust, whole-process real-time health monitoring, and multiple ignition and start functions, which can meet the market demand for launch vehicle reusability and low-cost launch; at the same time, it adopts no pyrotechnics start-up technology, which can meet the development needs of high-frequency tests and enhanced reliability verification. The TH-12 engine has a simple structure, high thrust-to-weight ratio, and high surface thrust density, and its product performance is at an international leading level.

The complete success of the long-range thermal test run of the TH-12 engine system marks the acceleration of the development of Tianlong-3, a large reusable liquid rocket of Tianbing Technology, and has entered the stage of mass production, which will help the comprehensive and rapid implementation of satellite Internet constellation construction. (Tianbing Technology)..

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #July2023 |successfully launching #TianLongThree #CarrierRocket #ReusableCarrierRocket secure financing, Tianlong-3 rocket accelerated development…

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

 This during this month of June July 2023 Tianbing Technology completed hundreds of millions of yuan in round C financing, Tianlong-3 Carrier  Rocket accelerated development …. Recently, Tianbing Technology announced that it has completed hundreds of millions of yuan in round C financing. This round of financing is led by Boyu Investment, CICC Capital, Youshan Capital follow-up. This round of funds will be used for the development of Tianbing Technology’s Tianlong-3 large-scale liquid launch vehicle and large-scale engine, the construction of launch stations, the construction of mass production capabilities, and the improvement of the talent team.



This round of financing is the 11th round of financing for Tianbing Technology. Since its establishment four years ago, Tianbing Technology has received a total of 3 billion yuan in financial support.

At present, Tianlong-2 has completed the signing of ten market orders, and has become a medium-sized launch vehicle with sufficient competitiveness in my country’s small and medium-sized satellite launch market.


According to the data, SpaceX of the United States plans to launch 42,000 low-orbit satellites into space, and more than 4,600 have been launched so far. my country also applied to the International Telecommunication Union for the “State Grid” constellation plan in September 2020, with a total of 12,992 satellites. Most of these satellites are 200kg-500kg each, and often require 30-60 satellites for co-orbit deployment. That is to say, the optimal capacity requirement for the launch vehicle is 10t-17t. In view of the pain points of market demand, Tianbing Technology’s Tianlong-3 large-scale liquid launch vehicle has fully carried out engineering research and development, which will provide important strategic support for my country’s new satellite Internet infrastructure.


The Tianlong-3 large-scale liquid carrier rocket is tailor-made for my country’s satellite Internet construction. It has a diameter of 3.8m, a take-off mass of 570t, and a low-earth orbit capacity of 17t. High reliability, high frequency” launch requirements. The rocket will apply dozens of new technologies to greatly improve the cost performance. At present, the engineering design and product production have been completed. It is planned to complete the first flight of the rocket in 2024. From 2025, it will have a commercial launch capability of 30 rounds per year.

After more than four years of development, Tianbing Technology has formed the layout of Beijing Rocket R&D Center, Xi’an Engine R&D Center, Zhengzhou Comprehensive Test Center, Zhangjiagang Intelligent Manufacturing Base, and Jiuquan Launch Support Base, forming a complete set of R&D, supply chain, production , test and launch capability system and support conditions.

Images and visuals are from their respectives also天兵科技北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 |#April2023 | #北京 #Beijing#天兵科技 #TianbingTechnology #SpacePioneer #Apirl2023 |What’s to come with its Next Generation #Tianlong #ReusableCarrierRocket #CarrierRocket Series.

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

Space Pioneer Next Generation Launch Carrier Rockets are using the Reusable Carrier Rocket eco system Tianlong 3 | Dragon-3 plans to fly for the first time in 2024……. Tianbing Technology’s Tianlong-3 large liquid launch vehicle (“TL-3”) is a benchmark SpaceX Falcon 9 rocket, with a diameter of 3.8m, a take-off mass of 590t, and an SSO capacity of over 15t. It uses a high-thrust, reusable liquid rocket The engine will take the lead in realizing the domestic “60 satellites with one Carrier Rocket” group shooting capability and meet the satellite Internet’s “low cost, high reliability, and high frequency” launch requirements.

At present, the key technologies of the rocket have been researched, and the first sample product has been put into production. It is planned to complete the first flight of the rocket in early 2024, and have the commercial launch capability of more than 12 rounds per year in 2025.

In addition, Tianbing Technology’s “TL-3H” heavy-duty rocket uses a common core-level parallel bundled technical solution to make the rocket’s take-off thrust reach 2310t, and the low-earth orbit capacity can reach 68t. As a reusable heavy-duty liquid rocket, the “TL-3H” sub-stage and booster can return autonomously, which will fully meet the transportation needs of large-tonnage interstellar scenarios such as space station delivery and lunar exploration projects.


“TL-3M” is an aerospace plane designed by Tianbing Technology. With a range of 14,000km, it can carry 100 people to and from any place in the world.

天兵科技 Space Pioneer Tianbing Technology is a high-tech enterprise that takes the lead in the development of a new generation of liquid rocket engines and medium and large liquid launch vehicles in my country’s commercial aerospace field. It was born along with the wave of global commercial aerospace development. The innovative concept of “Pioneer” and the corporate mission of “promoting the fifth transportation revolution of mankind” are determined to bring faster, farther and more economical rail transportation, intercontinental transportation and interstellar transportation services into the lives of the public.

The core team of Tianbing Technology are senior experts in the industry. The company has hundreds of aerospace front-line technical backbones and management backbones. The average age of team members is 38 years old, of which 67% have senior professional titles and above, and 95% have master’s degree or above. Tianbing Technology, a talent and technical elite, is building a world-class commercial aerospace enterprise with a leading force.

Tianbing Technology will take Beijing Rocket R&D Center, Xi’an Power R&D Center, Zhengzhou Comprehensive Test Center and Zhangjiagang Intelligent Manufacturing Base as strategic starting points, and strive to form a product development strategic layout of “three machines and two arrows” and an aerospace industry with “three centers and five platforms”. The intelligent manufacturing system, the supply chain system “based on the Yangtze River Delta and radiating the whole country”, and the launch market network “based on the whole of China and facing the world”, are determined to make unique contributions to the great rejuvenation of the Chinese nation and the prosperity of the global space economy.

Images and visuals are from their respectives also天兵科技 – Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 | #北京 #Beijing#北京天兵科技有限公司 #天兵科技 #TianbingTechnology #SpacePioneer #February2023 |#CarrierRocketShopping #TianLongTwo #CarrierRocket preparing for the first quarter first flight launch.

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

Tianbing Technology “Tianlong 2” liquid rocket plans to make its first flight in the first quarter of this year….. A few days ago, a real launch site was simulated on the outfield of Tianjin. , Successfully completed the whole system joint training of arrows and ground. The Modern Express reporter learned that the successful completion of the “Zhangjiagang” Tianlong-2 liquid carrier rocket rocket-ground system-wide joint training task marks that the first rocket of this rocket has met all the conditions for launch. It is planned to be launched in the first quarter of 2023. Choose an opportunity to launch.


It is understood that the Tianlong-2 liquid launch vehicle is the first liquid oxygen kerosene launch vehicle of Tianbing Technology. The rocket is in a three-stage state. About 190.0t, the maximum flight axial overload factor is less than 6.0. Equipped with upper-stage rockets, it can realize multi-satellite deployment, and the separation of primary and secondary stages, separation of satellites and arrows, and separation of fairings are all cold separations..

Images and visuals are from their respectives also天兵科技北京天兵科技有限公司Tianbing Technology- Space Pioneer..