Tag: 天兵科技

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #May2024 |successfully launching #天龙三号 #TianLongThree #CarrierRocket #ReusableCarrierRocket Tianlong- Payload Carrier Rocket Fairing Separation Test Completely Successful

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

[Tianbing Technology Tianlong 3 Rocket Fairing Separation Test Completely Successful]

On May 10th 2024, the Tianbing Technology large liquid launch vehicle Tianlong 3 (hereinafter referred to as TL-3) fairing separation test was successfully completed at the Zhangjiagang Intelligent Manufacturing Base.



In this test, the TL-3 fairing has a diameter of 4.2m and a length of about 13m. It is made of all-carbon fiber composite materials. It is the largest fairing in domestic commercial aerospace and the largest all-carbon fiber fairing in China. It is also the first in China for the Internet. Constellation tailor-made fairing.

In this test, the connection and unlocking mechanism and the separation energy source are all reusable and non-pyrotechnical designs. The simulated satellite is designed and manufactured according to the maximum available space within the cover. A low-cost, reusable large airbag recovery solution is used in the test. The test verified the entire process of fairing separation, and focused on assessing the function and performance of the separation system. All parameters during the separation process met the design requirements, and dozens of non-pyrotechnics connection unlocking mechanisms (MCD) and separation springs worked perfectly, successfully creating China’s first large-scale liquid launch vehicle fairing without pyrotechnics separation.



The development of TL-3 closely focused on high performance, low cost, high reliability, fast response, and mass production and adopted more than 50 innovative technologies. More than 30 of them were applied for the first time in China’s aerospace industry, and MCD was one of them. R&D personnel will begin the comprehensive layout of 4.2m large-diameter composite fairings and MCD products in 2022. The fairing and MCD of this test have gone through many technical iterations during the research and development process, and have completed various environmental tests and reliability growth tests.

TL-3 continues the sequential test verification method of TL-2. The test comprehensively covers the entire process from mechanics, to thermal, to electromagnetic, to comprehensive matching. It plans a total of 150 developmental tests in 42 categories. Through retesting, Tested and evaluated products are used to perform flight missions to increase flight reliability. The sequential test plan and test method greatly shorten the product development cycle and reduce the development cost. It is Tianbing’s unique R&D management innovation.



Behind all the amazing results, there is unknown dedication and hard work. The honorary crown of Tianbing Technology and the amazing speed of “Tianbing” are the embodiment of the responsibility and mission of Tianbing people to shorten the gap with foreign countries in the field of commercial aerospace as soon as possible. They start from themselves and show the ingenuity and wisdom that are not inferior to foreign countries. The belief in self-improvement and the spirit of hard work have contributed to the rapid rise of China’s commercial aerospace industry.



In this test, more than 30 test assembly personnel worked closely with the R&D backbones of various departments, and the whole process was open during holidays. In the five days before the test, all test personnel worked all night long to work with all parties to ensure the complete success of the fairing separation test.

Tianbing Technology’s Tianlong-3 large-diameter full carbon fiber composite fairing, as well as innovative technical solutions without pyrotechnics separation, pioneered the development and innovation of my country’s large-scale liquid launch vehicle fairings, ensuring that my country’s tailor-made for the construction of Internet constellations The successful launch and stable mass production of the Tianlong-3 large-scale liquid launch vehicle will surely lead China’s commercial aerospace industry into the era of large-capacity liquid rockets.

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #October2023 | #Tianlong2 Yao-2 #CarrierRocket departed from #Tianjin assembled at the Zhangjiagang preparing to launch second half next year..

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

[天龙三号Tianlong 3 plans to complete the first flight of the rocket in the first half of 2024] Recently, Tianbing Technology announced the completion of several hundred million yuan in C+ round financing, which will be used for the mass production of the Tianlong 2 medium-sized liquid rocket that successfully made its first flight, as well as the Tianlong 3 The development and first flight of large-scale liquid launch vehicles and engines, the research and testing of recyclable and reusable technology, the construction of Tianlong-3 dedicated launch stations, the construction of batch production capabilities and the improvement of talent teams.

[The Tianlong-2 Yao-2 rocket departed from Tianjin and successfully arrived in Zhangjiagang. The rocket will be assembled at the Zhangjiagang Intelligent Manufacturing Base and is expected to carry out its launch mission in the second half of next year! 】On October 29, the Tianlong-2 Yao-2 rocket developed by Tianbing Technology successfully arrived in Zhangjiagang from Tianjin. This marks that Tianbing Technology’s rocket assembly plant in Tianjin has officially moved to Zhangjiagang. Tianbing Technology’s Zhangjiagang intelligent manufacturing base will soon be fully operational. use.


It is reported that the rocket will be assembled at the Zhangjiagang Intelligent Manufacturing Base and will be launched next year.


The Tianlong-2 Yao-2 rocket body was split into three parts: the fairing, the third sub-stage, and the first sub-stage for transportation. It departed from Tianjin at 5:15 a.m. on October 27 and arrived at Zhangjiagang Intelligent Manufacturing of Tianbing Technology at 12 noon today. base. At the scene, (Integrated Media Reporter: Huang Jiayuan) the reporter saw that the rocket body successfully entered the rocket transfer area of ​​the base, waiting for subsequent final assembly work. The Tianlong-2 rocket, once named after the city of Zhangjiagang, is my country’s first medium-sized liquid launch vehicle for commercial aerospace to fly on its first flight. It has created a history of successful first flights for private aerospace in the world in more than 20 years, and also created a new era for Chinese commercial aerospace. A new era of liquid rockets in space.
Tianbing Technology’s Zhangjiagang Intelligent Manufacturing Base is expected to be fully delivered and put into use by the end of December this year. Once put into operation, it will be able to produce 30 liquid launch vehicles and 500 rocket engines annually.

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #October2023 |successfully launching #天龙三号 #TianLongThree #CarrierRocket #ReusableCarrierRocket Tianlong-3 plans to complete the first flight of the rocket in the first half of 2024 ….

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

[天龙三号Tianlong 3 plans to complete the first flight of the rocket in the first half of 2024] Recently, Tianbing Technology announced the completion of several hundred million yuan in C+ round financing, which will be used for the mass production of the Tianlong 2 medium-sized liquid rocket that successfully made its first flight, as well as the Tianlong 3 The development and first flight of large-scale liquid launch vehicles and engines, the research and testing of recyclable and reusable technology, the construction of Tianlong-3 dedicated launch stations, the construction of batch production capabilities and the improvement of talent teams.


The Tianlong-3 large liquid launch vehicle is tailor-made for the construction of my country’s satellite Internet infrastructure. Its product performance is benchmarked against the SpaceX Falcon 9 rocket. It has a diameter of 3.8m, a take-off mass of 590t, a LEO capacity of 17t, and an SSO capacity of 14t. It uses high thrust. , the reusable liquid rocket engine will be the first in China to achieve the capability of group shooting of more than 30 satellites in one rocket, meeting the “low-cost, high-reliability, and high-frequency” launch requirements of the satellite Internet. At present, the rocket has completed product design and production and is undergoing ground testing and verification. It is planned to complete the first flight of the rocket in the first half of 2024. Within three years after the first flight, it will have a commercial launch capability of more than 30 rounds per year..

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #July2023 |#Tianhuo12 #TH12-  100-ton liquid #ReusableCarrierRocketEngine  #ReusableCarrierRocketEngine first flight status and long-range thermal test of the whole system were successfully completed….

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

[Tianbing Technology’s 100-ton liquid rocket engine first flight status and long-range thermal test of the whole system were successfully completed] Recently on the week on 24th July 2023 , Tianhuo 12 (hereinafter referred to as TH-12), a 110-ton thrust liquid oxygen kerosene rocket engine “Tianhuo 12” (hereinafter referred to as TH-12), a large liquid carrier rocket of Tianbing Technology, successfully completed the long-range thermal test of the whole system.

During the test run, the engine started quickly, worked smoothly, and shut down normally. The data shows that the engine works stably for a long time under the rated working conditions, and various performance indicators meet the design requirements and meet the rocket flight requirements.


The Tianhuo 12  is specifically  designated towards the  Reusable Carrier Rocket Tianlong-2 medium-sized liquid carrier rocket independently developed by Tianbing Technology successfully made its maiden flight. This is the first private liquid rocket in China. On the basis of the successful launch, Tianbing Technology independently developed the Tianlong-3 large liquid launch vehicle. Compared with the Tianlong-2 rocket, the Tianlong-3 rocket has a greater carrying capacity. The self-developed 100-ton Tianhuo 12 liquid oxygen kerosene rocket engine has passed the test run of the whole system under various working conditions.

Through multiple long-range hot test runs under rated conditions, the following goals have been achieved:

1) The correctness of the engine design state has been verified.
The test results have proved that all key technologies such as air-conditioning multiple start technology, self-ignition ignition technology, combustion instability suppression technology, super-large thrust chamber 3D printing manufacturing technology and turbine disk thermal component 3D printing technology have made breakthroughs, and the design state of the engine has been completely determined.
2) The correctness of the engine batch production process was verified.


This test product is the first set of products to be mass-produced and manufactured relying on social resources, which marks that the low-cost manufacturing routes such as the engine manufacturing process plan, process flow, and production organization model have been verified. It can be fully transferred to the mass production and delivery stage of 40 engines.

Tianlong-3 is the first large-scale liquid launch vehicle in my country’s commercial aerospace field, which will greatly enhance the carrying capacity of my country’s commercial spaceflight. The power system of Tianlong-3 adopts a fully self-developed TH-12 liquid oxygen kerosene rocket engine, with a design thrust of 110 tons and a thrust-to-weight ratio of 163.

The TH-12 engine has deep variable thrust, whole-process real-time health monitoring, and multiple ignition and start functions, which can meet the market demand for launch vehicle reusability and low-cost launch; at the same time, it adopts no pyrotechnics start-up technology, which can meet the development needs of high-frequency tests and enhanced reliability verification. The TH-12 engine has a simple structure, high thrust-to-weight ratio, and high surface thrust density, and its product performance is at an international leading level.

The complete success of the long-range thermal test run of the TH-12 engine system marks the acceleration of the development of Tianlong-3, a large reusable liquid rocket of Tianbing Technology, and has entered the stage of mass production, which will help the comprehensive and rapid implementation of satellite Internet constellation construction. (Tianbing Technology)..

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #July2023 |successfully launching #TianLongThree #CarrierRocket #ReusableCarrierRocket Tianlong-3 plans to make its first flight in May next year 2024…

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

 On July 12, 2023, the Ninth China (International) Commercial Aerospace Summit Forum opened in Wuhan. This forum is jointly directed by China National Space Administration, China Meteorological Administration, China Manned Space Engineering Office, Hubei Provincial People’s Government, Wuhan Municipal People’s Government, China Aerospace Science and Industry Corporation, China Aerospace Science and Technology Corporation, China Electronics Technology Co., Ltd. It is co-sponsored by Group Co., Ltd., China Aerospace Foundation and Chinese Society of Astronautics. Ji Qiming, Assistant Director of China Manned Space Engineering Office, Zhang Hailian, Deputy Chief Designer of China Manned Space Engineering and other leaders attended the forum.

[Tianlong-3 rocket plans to make its first flight in May next year, and it will be able to achieve an annual output of 30 rounds]

The Tianlong-3 rocket is scheduled to complete its first flight in May 2024, and will subsequently have a commercial launch service capability of more than 30 rounds per year. The Tianlong-3 rocket has a diameter of 3.8 meters, a total length of 71 meters, a take-off mass of 590 tons, a take-off thrust of 770 tons, a low-earth orbit capacity of 17 tons, and a sun-synchronous orbit capacity of 14 tons.

Space Pioneer, a Beijing-based private rocket maker, plans to carry out the debut launch of its TL 3 carrier rocket in 2024.The company said it hopes the model will become the backbone of China’s commercial space launch market. According to Space Pioneer, the TL 3 will be 71 meters tall, with a diameter of 3.8 meters. With a liftoff weight of 590 tons and a thrust of 770 tons, the rocket will be capable of sending satellites with a combined weight of 14 tons into a typical sun-synchronous orbit at an altitude of 500 kilometers, or putting a spacecraft weighing 17 tons into a low-Earth orbit.

2024 The first launch of its TL 3 launch vehicle. The company said it hopes the model will become a mainstay in China’s commercial space launch market. TL 3 is 71 meters high and 3.8 meters in diameter. With a take-off weight of 590 tons and a thrust of 770 tons, the rocket is capable of sending satellites with a total weight of 14 tons into a typical sun-synchronous orbit at an altitude of 500 kilometers, or a spacecraft weighing 17 tons into low-Earth orbit. 

In April 2023, the Tianlong-2 medium-sized liquid carrier rocket independently developed by Tianbing Technology successfully made its maiden flight. This is the first private liquid rocket in China. On the basis of the successful launch, Tianbing Technology independently developed the Tianlong-3 large liquid launch vehicle. Compared with the Tianlong-2 rocket, the Tianlong-3 rocket has a greater carrying capacity. The self-developed 100-ton Tianhuo 12 liquid oxygen kerosene rocket engine has passed the test run of the whole system under various working conditions.

Zhang Chenxing, deputy director of the general department of Tianbing Technology Rocket R&D Center, needs to consider the transportation capacity and launch cost of the rocket launch. In the face of satellites weighing 300 kg to 500 kg, the Tianlong-3 rocket can carry 30 to 60 satellites at a time, and the launch cost can be effectively reduced to the price level of the US Space Exploration Technology Corporation (SpaceX) “Falcon 9” rocket.

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..