Tag: Reusable carrier Rocket Ecosystem

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #July2023 |#Tianhuo12 #TH12-  100-ton liquid #ReusableCarrierRocketEngine  #ReusableCarrierRocketEngine first flight status and long-range thermal test of the whole system were successfully completed….

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

[Tianbing Technology’s 100-ton liquid rocket engine first flight status and long-range thermal test of the whole system were successfully completed] Recently on the week on 24th July 2023 , Tianhuo 12 (hereinafter referred to as TH-12), a 110-ton thrust liquid oxygen kerosene rocket engine “Tianhuo 12” (hereinafter referred to as TH-12), a large liquid carrier rocket of Tianbing Technology, successfully completed the long-range thermal test of the whole system.

During the test run, the engine started quickly, worked smoothly, and shut down normally. The data shows that the engine works stably for a long time under the rated working conditions, and various performance indicators meet the design requirements and meet the rocket flight requirements.


The Tianhuo 12  is specifically  designated towards the  Reusable Carrier Rocket Tianlong-2 medium-sized liquid carrier rocket independently developed by Tianbing Technology successfully made its maiden flight. This is the first private liquid rocket in China. On the basis of the successful launch, Tianbing Technology independently developed the Tianlong-3 large liquid launch vehicle. Compared with the Tianlong-2 rocket, the Tianlong-3 rocket has a greater carrying capacity. The self-developed 100-ton Tianhuo 12 liquid oxygen kerosene rocket engine has passed the test run of the whole system under various working conditions.

Through multiple long-range hot test runs under rated conditions, the following goals have been achieved:

1) The correctness of the engine design state has been verified.
The test results have proved that all key technologies such as air-conditioning multiple start technology, self-ignition ignition technology, combustion instability suppression technology, super-large thrust chamber 3D printing manufacturing technology and turbine disk thermal component 3D printing technology have made breakthroughs, and the design state of the engine has been completely determined.
2) The correctness of the engine batch production process was verified.


This test product is the first set of products to be mass-produced and manufactured relying on social resources, which marks that the low-cost manufacturing routes such as the engine manufacturing process plan, process flow, and production organization model have been verified. It can be fully transferred to the mass production and delivery stage of 40 engines.

Tianlong-3 is the first large-scale liquid launch vehicle in my country’s commercial aerospace field, which will greatly enhance the carrying capacity of my country’s commercial spaceflight. The power system of Tianlong-3 adopts a fully self-developed TH-12 liquid oxygen kerosene rocket engine, with a design thrust of 110 tons and a thrust-to-weight ratio of 163.

The TH-12 engine has deep variable thrust, whole-process real-time health monitoring, and multiple ignition and start functions, which can meet the market demand for launch vehicle reusability and low-cost launch; at the same time, it adopts no pyrotechnics start-up technology, which can meet the development needs of high-frequency tests and enhanced reliability verification. The TH-12 engine has a simple structure, high thrust-to-weight ratio, and high surface thrust density, and its product performance is at an international leading level.

The complete success of the long-range thermal test run of the TH-12 engine system marks the acceleration of the development of Tianlong-3, a large reusable liquid rocket of Tianbing Technology, and has entered the stage of mass production, which will help the comprehensive and rapid implementation of satellite Internet constellation construction. (Tianbing Technology)..

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造| #ISpace #星际荣耀#InterstellarGlory #July2023 | #ChinesePrivateSpaceCompany –#ReusableCarrierRocket #CarrierRocket Ninth China (International) Commercial Aerospace Summit Forum Summary of the latest Reusable Carrier Rocket development launch vehicle…

kevinjamesngLeave a comment

In which iSpace- Interstellar Glory in which it is the first Chinese Private Space Company to do so successfully commercially first out from sixty known private space companies in China People’s Republic of China…  Founded in Beijing 2016 located in Beijing Economic and Technological Development Zone or known for short as E-Town in Capital of China – People’s Republic of China …

Beijing Interstellar Glory Space Technology Co., Ltd. (referred to as “Interstellar Glory”) was established in October 2016, with Peng Xiaobo as the legal representative. The company is committed to developing excellent commercial launch vehicles and providing systematic launch solutions, providing global commercial aerospace customers with more efficient, higher-quality, and more cost-effective launch services, so as to greatly improve the ability of human beings to freely enter and exit space.

The company focuses on the research and development of intelligent launch vehicles, and provides integrated commercial launch services for global satellite and constellation customers.

 On July 12, 2023, the Ninth China (International) Commercial Aerospace Summit Forum opened in Wuhan. This forum is jointly directed by China National Space Administration, China Meteorological Administration, China Manned Space Engineering Office, Hubei Provincial People’s Government, Wuhan Municipal People’s Government, China Aerospace Science and Industry Corporation, China Aerospace Science and Technology Corporation, China Electronics Technology Co., Ltd. It is co-sponsored by Group Co., Ltd., China Aerospace Foundation and Chinese Society of Astronautics. Ji Qiming, Assistant Director of China Manned Space Engineering Office, Zhang Hailian, Deputy Chief Designer of China Manned Space Engineering and other leaders attended the forum.

【Summary of the latest development of the Interstellar Glory launch vehicle】

▲The rocket type spectrum is only hyperbolic No. 1, hyperbolic No. 2 Y, hyperbolic No. 3, hyperbolic No. 3 B, SQZ-2 and the abstract asymmetrical SQX- 3A does not seem to engage in.

▲ Hyperbolic No. 1 Yaoqijian is scheduled to be launched in August 2023, and the final assembly of 4 rounds of Hyperbolic No. 1 will be completed by the end of this year. It is expected to have a launch capacity of 10 rounds per year by 2025.

▲ The 15-ton methane machine “Focus No. 1” has been tested for more than 12,000 seconds on the ground.

▲ The 105-ton methane machine “Focus No. 2” completed the semi-system test run in March this year, and this month is carrying out the hot test run of the whole system. It is planned to complete the engine reliability test run by December 2024 (the test run time will reach 10,000 seconds)



▲Hyperbola No. 2 Verification (SQX-2Y) The arrow has a diameter of 3.35 meters and a total length of 17 meters. It uses a Focus No. 1 engine. It is currently planned to carry out vertical take-off and landing tests in the second half of this year. The landing accuracy is expected to be better than 3 meters.

▲The basic type of Hyperbola No. 3 is a two-stage liquid oxygen methane rocket, with a diameter of 4.2 meters, a total length of 69 meters, a take-off mass of 490 tons, 9 units of Focus No. 2 in parallel, and a LEO capacity of 13.4 tons (not recycled)/8.5 tons ( Reuse), 500kmSSO capacity is 10.4 tons (non-recycling)/6.2 tons (reuse). It is currently planned to make its first flight in 2025, realize rocket recovery in 2026, and have a launch capacity of 25 rounds per year in 2030.

▲The hyperbolic No. 3 extended model includes: the hyperbolic No. 3 B bundled with CBC, and the three-stage configuration high-orbit rocket with the addition of a low-temperature final stage. Among them, the LEO transportation capacity of Hyperbola No. 3 B in the recovery state is not less than 15 tons, and the 500km SSO transportation capacity is 26.2 tons (non-recycling)/10.6 tons (reuse).

▲The hyperbolic No. 3 series of liquid rockets adopts the “three-level” test and launch mode. The expected test and launch cycle is 14 days, and the rocket takes up 2.5 days at the station. The 4.2-meter rocket body is transported into the field by road and is expected to be launched at the Hainan Commercial Launch Site in Wenchang.

▲Interstellar Glory plans to finally realize the annual production capacity of 50 liquid oxygen methane engines, 8 attitude control engine systems, and 10 liquid rockets. At present, the storage tank production line is undergoing equipment debugging and some process verification, and it is expected to be in the state of final assembly and debugging by the end of this year.

Images-visuals are from Weibo and their respectives..

#MadeInChina #中國製造 #中國 | #北京 #Beijing #天兵科技 #TianbingTechnology #SpacePioneer #July2023 |successfully launching #TianLongThree #CarrierRocket #ReusableCarrierRocket Tianlong-3 plans to make its first flight in May next year 2024…

kevinjamesngLeave a comment

Founded in 2015 located in Beijing ….天兵科技 – 北京天兵科技有限公司Tianbing Technology is an Aerospace propulsion system supplier and spacecraft provider One of Sixty Plus Chinese carrier Rocket companies in China, People’s Republic of China ……. Tianbing Technology is an advanced aerospace propulsion system supplier and aerospace vehicle provider. Tianbing Technology independently develops the next-generation ambient temperature green HCP liquid propellant and minimalist aerospace propulsion system. As an upgraded product of traditional chemical propulsion system, it can meet cost-effective aerospace. Advance system supporting needs. The next-generation green HCP aerospace propulsion system, first tested by Tianbing Technology, can be used in the small-vehicle main power and launch vehicle upper-level propulsion system.

 On July 12, 2023, the Ninth China (International) Commercial Aerospace Summit Forum opened in Wuhan. This forum is jointly directed by China National Space Administration, China Meteorological Administration, China Manned Space Engineering Office, Hubei Provincial People’s Government, Wuhan Municipal People’s Government, China Aerospace Science and Industry Corporation, China Aerospace Science and Technology Corporation, China Electronics Technology Co., Ltd. It is co-sponsored by Group Co., Ltd., China Aerospace Foundation and Chinese Society of Astronautics. Ji Qiming, Assistant Director of China Manned Space Engineering Office, Zhang Hailian, Deputy Chief Designer of China Manned Space Engineering and other leaders attended the forum.

[Tianlong-3 rocket plans to make its first flight in May next year, and it will be able to achieve an annual output of 30 rounds]

The Tianlong-3 rocket is scheduled to complete its first flight in May 2024, and will subsequently have a commercial launch service capability of more than 30 rounds per year. The Tianlong-3 rocket has a diameter of 3.8 meters, a total length of 71 meters, a take-off mass of 590 tons, a take-off thrust of 770 tons, a low-earth orbit capacity of 17 tons, and a sun-synchronous orbit capacity of 14 tons.

Space Pioneer, a Beijing-based private rocket maker, plans to carry out the debut launch of its TL 3 carrier rocket in 2024.The company said it hopes the model will become the backbone of China’s commercial space launch market. According to Space Pioneer, the TL 3 will be 71 meters tall, with a diameter of 3.8 meters. With a liftoff weight of 590 tons and a thrust of 770 tons, the rocket will be capable of sending satellites with a combined weight of 14 tons into a typical sun-synchronous orbit at an altitude of 500 kilometers, or putting a spacecraft weighing 17 tons into a low-Earth orbit.

2024 The first launch of its TL 3 launch vehicle. The company said it hopes the model will become a mainstay in China’s commercial space launch market. TL 3 is 71 meters high and 3.8 meters in diameter. With a take-off weight of 590 tons and a thrust of 770 tons, the rocket is capable of sending satellites with a total weight of 14 tons into a typical sun-synchronous orbit at an altitude of 500 kilometers, or a spacecraft weighing 17 tons into low-Earth orbit. 

In April 2023, the Tianlong-2 medium-sized liquid carrier rocket independently developed by Tianbing Technology successfully made its maiden flight. This is the first private liquid rocket in China. On the basis of the successful launch, Tianbing Technology independently developed the Tianlong-3 large liquid launch vehicle. Compared with the Tianlong-2 rocket, the Tianlong-3 rocket has a greater carrying capacity. The self-developed 100-ton Tianhuo 12 liquid oxygen kerosene rocket engine has passed the test run of the whole system under various working conditions.

Zhang Chenxing, deputy director of the general department of Tianbing Technology Rocket R&D Center, needs to consider the transportation capacity and launch cost of the rocket launch. In the face of satellites weighing 300 kg to 500 kg, the Tianlong-3 rocket can carry 30 to 60 satellites at a time, and the launch cost can be effectively reduced to the price level of the US Space Exploration Technology Corporation (SpaceX) “Falcon 9” rocket.

Images and visuals are from their respectives also天兵科技 – 北京天兵科技有限公司Tianbing Technology- Space Pioneer..

#MadeInChina #中國製造 |#深蓝航天#DeepBlueLimitedCompany #July2023| Deep Blue Aerospace Xingyun-1  #ReusableCarrierRocket Development Progress – completed the first domestic rectification using a non-pyrotechnic connection unlocking faring mechanism…

kevinjamesngLeave a comment

深蓝航天  Deep Blue Limited – Deep Blue Aerospace One of sixty Chinese private space Carrier Rocket Companies in China-People’s Republic of China…  As many of sixty plus Private Rocket Deep Blue Aerospace Co., Ltd. was established in 2017. The company is mainly a high-tech aerospace enterprise that focuses on the direction of liquid recovery and reusable launch vehicles and provides users with commercial launch services. Deep Blue Aerospace Co., Ltd. is headquartered in Nantong City, Jiangsu Province. At the same time, the company has rocket general and liquid engine R&D centers in Yizhuang, Beijing and Xi’an, Shaanxi, respectively, and a rocket power system test base in Tongchuan, Shaanxi…..

Recently this month of June July 2023 , the separation test of the fairing of the “Xingyun-1” liquid recyclable and reusable launch vehicle of Shenlan Aerospace was a complete success. This is the first test in China to use a non-pyrotechnic connection unlocking mechanism to separate the fairing. In order to fully verify the separation state of the fairing under different deviations, Deep Blue Aerospace has conducted many experiments on this round, all of which use the self-developed non-pyrotechnic connection unlocking mechanism. The separation timing of the test is correct, which is basically consistent with the simulation results. No damage occurred in

This round of separation tests was completed in the Deep Blue Aerospace Nantong rocket assembly base, and the fairing was completely recovered after multiple tests. ​The main technical indicators of this round of fairing separation test have been completed:

This round of tests used the same set of connection and unlocking mechanisms to complete multiple separation tests within three days, verifying the reusability and rapid response capabilities of the self-developed non-pyrotechnic connection and unlocking mechanism, which is the first time in domestic fairing separation tests. ​

This round of fairing separation test is one of the phase tests before the first flight of the “Xingyun-1” liquid reusable launch vehicle. The success of this round of tests will pave the way for the first flight of the “Xingyun-1” rocket in 2024 established a solid foundation.

Why did the rocket separate the fairing? ​ ​The launch vehicle will encounter harsh environments during flight. The fairing protects the satellite load from aerodynamic force and aerodynamic heat, and also reduces the aerodynamic resistance of the launch vehicle during flight. After leaving the atmosphere, the launch vehicle is no longer affected by aerodynamics, and throwing away the fairing helps to increase the rocket’s carrying capacity. 

Images and visuals are from their Respectives.

#MadeInChina #中國製造| #ISpace #星际荣耀#InterstellarGlory #July2023 | #ChinesePrivateSpaceCompany –#ReusableCarrierRocket #CarrierRocket Engine testing Hyperbola No. 2 Verification Rocket Power System Trial Test Successfully

kevinjamesngLeave a comment

In which iSpace- Interstellar Glory in which it is the first Chinese Private Space Company to do so successfully commercially first out from sixty known private space companies in China People’s Republic of China…  Founded in Beijing 2016 located in Beijing Economic and Technological Development Zone or known for short as E-Town in Capital of China – People’s Republic of China …

Beijing Interstellar Glory Space Technology Co., Ltd. (referred to as “Interstellar Glory”) was established in October 2016, with Peng Xiaobo as the legal representative. The company is committed to developing excellent commercial launch vehicles and providing systematic launch solutions, providing global commercial aerospace customers with more efficient, higher-quality, and more cost-effective launch services, so as to greatly improve the ability of human beings to freely enter and exit space.

reusable liquid launch vehicle

Hyperbola-2 (Hyperbola-2)

The Hyperbola-2 launch vehicle is a small liquid launch vehicle with a two-stage tandem configuration, which is used to provide small satellite launch services. The hyperbolic No. 2 carrier rocket has a length of 28m, a first-stage rocket body diameter of 3.35m, a second-stage rocket body diameter of 2.25m, a take-off thrust of 106t, and a low-Earth orbit carrying capacity of 1.9 tons.
The Hyperbola-2 carrier rocket uses liquid oxygen/methane as propellant, which is non-toxic and non-polluting; the first sub-stage has the function of vertical landing and recovery, which can be reused, further reducing the cost of satellite launch services.

The company focuses on the research and development of intelligent launch vehicles, and provides integrated commercial launch services for global satellite and constellation customers.

At 16:00 Hours Hong Kong SAR- Beijing Time on July 5th, 2023, the test run of the SQX-2Y rocket power system was a complete success. Interstellar Glory Hyperbola No. 2 Verification Rocket Power System Trial Test Successfully】Interstellar Glory Hyperbola No. 2 Verification (SQX-2Y) rocket is a type of vertical recovery and reuse used to verify the liquid oxygen methane reusable launch vehicle The verification rocket adopts a full-scale rocket body diameter of 3.35m, and can be installed with one or more self-developed Focus No. 1 engines according to mission requirements to verify the real flight and return conditions of the first sub-stage of the reusable launch vehicle.



At 16:00 on July 5, 2023, the test run of the SQX-2Y rocket power system was a complete success.

The procedures of SQX-2Y rocket approach, stage, test, inflation, filling, precooling, ignition, post-processing and other procedures are strictly implemented in accordance with the launch site procedures; throughout the test process, the power system and control system are in accordance with the real flight test conditions. Continuously variable thrust of the engine and engine swing control were carried out. All systems worked normally and the performance was stable. All performance indicators met the design requirements. The participating systems were efficiently matched. The rocket shut down normally after working according to the actual flight procedure. The timing of this test run will be launched soon. The flight sequence of the kilometer-level vertical take-off and landing test has been comprehensively assessed for the whole system.

So far, SQX-2Y rocket power system and electrical system testing, propellant filling and leakage, engine pre-cooling and operation, shutdown and landing post-processing have been fully verified, and the whole system has successfully passed the test assessment.

The SQX-2Y rocket power system test run is an important and critical large-scale ground test before the Hyperbola II verification flight test. The correctness and effectiveness of the process. The complete success of this test mission has laid a solid foundation for the SQX-2Y rocket to carry out vertical take-off and landing flight tests.

Images-visuals are from Weibo and their respectives..