#CNSA #ChinaNationalSpaceAdministration #國家航天局 |#BeltAndRoadinitiative #February2021 |#火星 # 天問 #天问一号 #LongMarch5 #ChangZheng5 #TianwenOne #MarsMission #Marslander #MarsRover #MarsProbe enters a large elliptical circular orbit towards #UtopiaPlanitia #Mars For collaborative exploration for the #ChineseLunarNewYear..

 

天问一号飞運騎遊達达3亿 …….As of the evening 10th February 2021, CNSA – China National Space Administration- ESA – European Space agency Belt and road initiative mars mission…first Mars exploration mission, Tianwen- Martian Probe One Tianwen-1 successfully implemented Mars capture, China’s first Mars exploration mission to circumnavigate Mars and succeeded] According to the China National Space Administration, at 19:52 on February 10, 2021, China’s first Mars exploration mission, Tianwen-1, was implemented Near-fire capture and braking, the orbiter 3000N orbital-controlled engine ignites for about 15 minutes, and the probe smoothly enters a large elliptical circular fire orbit with a near-fire height of about 400 kilometers, a period of about 10 Earth days, and an inclination of about 10º. The first man-made Mars satellite has achieved the goal of “orbiting, orbiting, and patrolling” the first step, and successfully orbiting Mars.

After the first Mars exploration mission entered the Mars capture phase from the ground fire transfer phase, the medium-resolution camera, high-resolution camera, magnetometer, mineral spectrum Analyzer, ion and neutral particles and energy particles carried by the Tianwen-1 orbiter the payloads such as sounding instruments will continue to work to carry out multi-dimensional exploration of Mars…..

Since its successful launch on July 23, 2020, the Tianwen-1 probe has accumulated 202 days of flight, completed 1 deep-space manoeuvre and 4 midway corrections, and had a flight mileage of approximately 475 million kilometers upon reaching Mars, and a distance of approximately 1.92 from Earth 100 million kilometers, the one-way delay of device-to-ground communication is about 10.7 minutes, and each system is in good condition. Subsequent Tianwen-1 will undergo multiple orbital adjustments, enter the Mars mooring orbit, and carry out pre-selected landing zone exploration. It is planned to choose an opportunity to land on Mars and carry out inspection exploration from May to June 2021.

Previously天问一号飞運騎遊達达3亿 …….As of the evening 5th February 2021, CNSA – China National Space Administration- ESA – European Space agency Belt and road initiative mars mission…first Mars exploration mission, Tianwen- Martian Probe One …… The Tianwen-1’s flight mileage exceeded 465 kilometers…..in which its expected landing for the Tianwen-1 to land on Utopia Planitia just before the Chinese Lunar New Years for the Year of the OX on  12th February 2021 landing on 10th February 2021….. In which it photography of first image of the rustic planet of Mars in which is roughly half the diameter of planet Earth…

Tianwen-1 completed the fourth midway correction of its orbit and returned the first image of Mars……At 20:00 Hong Kong – Beijing Time on February 5, 2021, the engine ignition of the Tianwen-1 probe on the first Mars exploration mission was completed, and the fourth ground-fire transfer section was successfully completed The orbit was corrected midway to ensure that Mars capture was carried out as planned. Up to now, Tianwen-1 has been in orbit for about 197 days, about 184 million kilometers from the earth, about 1.1 million kilometers from Mars, and a flight mileage of about 465 million kilometers. The probe systems are in good condition. Prior to this, Tianwen-1 acquired the first Martian image at a distance of about 2.2 million kilometers from Mars.

Images and visuals are from Weibo

#CNSA #ChinaNationalSpaceAdministration #國家航天局 |#BeltAndRoadinitiative #December2020 |#火星 # 天問 #天问一号 #LongMarch5 #ChangZheng5 #TianwenOne #MarsMission #Marslander #MarsRover #MarsProbe does a course almost mid-December direction heading towards the #UtopiaPlanitia #Mars For collaborative exploration..

 

天问一号飞運騎遊達达3亿 …….As of the early morning Monday of 14th December, 2020, CNSA – China National Space Administration- ESA – European Space agency Belt and road initiative mars mission…first Mars exploration mission, Tianwen-1 …….Tianwen-1 probe is more than 100 million kilometers away from the earth] It is learned from the National Space Administration that as of 21:00 Hong Kong – Beijing Time on December 14, the Tianwen-1 probe has been in orbit for 144 days, with a flight mileage of approximately 360 million kilometers, and is far from the earth. Over 100 million kilometers, about 12 million kilometers away from Mars, the flight is in good condition. Affected by the laws of movement of celestial bodies, the distance between Mars and the Earth varies periodically from 50 million kilometers to more than 400 million kilometers. When the Tianwen-1 rover arrived near Mars, it was about 190 million kilometers away from Earth. Since the launch of Tianwen 1 on July 23, it has successfully completed a group photo of the earth and the moon, “Selfie” of the probe, three midway corrections, a deep-space maneuver, and payload self-check. In the follow-up, several orbit corrections will be carried out. It is expected that after approaching Mars in mid-February next year, “brake” braking will be implemented to enter the ring fire orbit in preparation for Mars landing. (杨璐戚铁磊) #Tianwen 1 probe is more than 100 million kilometers away from the earth 我们的空间…… In the follow-up, Tianwen-1 will conduct several orbit corrections. It is expected to “brake” after approaching Mars in February next year and implement braking into the ring fire orbit.

The hometown is far away and the goal is getting closer. 100 million kilometers is equivalent to 2,499 the length of the earth’s equator. Now, Tianwen-1 is flying to Mars at a ground speed of 17.4 kilometers per second…….

天问一号飞運騎遊達达3亿 …….As of the previously morning Tuesday of November 17th, 2020, CNSA – China National Space Administration- ESA – European Space agency Belt and road initiative mars mission…first Mars exploration mission, Tianwen-1, has been in orbit for 116 days, with a flight mileage of more than 300 million kilometers. The earth is approximately 63.8 million kilometers. The detector’s attitude is stable, the energy is balanced, some sub-systems have completed self-checking, and each system is working normally.

During its orbital flight, Tianwen-1 has completed three midway corrections and one deep-space maneuver and other flight control tasks. In early November, the landing patrol vehicle entry module and multiple sub-systems of the Mars rover completed the first on-orbit self-check, and the results were normal.

Tianwen-1 is scheduled to reach Mars in February 2021 and carry out Mars capture. In May 2021, it will choose an opportunity to de-orbit, and the landing patrol will be separated from the orbiter, soft landing on the surface of Mars, the rover will leave the landing platform, and the inspection will be carried out…. For the Martian exploration..

Previously On the 9th October 2020 Friday 2300 hours Beijing time CNSA – China National Space Administration that under the control of the flight control team of China’s first Mars exploration mission, the main engine of the Tianwen-1 probe was ignited. In more than 480 seconds, the deep space maneuver was successfully completed. The orbital maneuver was carried out in deep space approximately 29.4 million kilometers from the earth. The orbit design of Tianwen-1 comprehensively considered various constraints from launch to Mars capture and made the propellant consumption as small as possible, and adopted the strategy of a deep space maneuver during the transfer process. The probe will rendezvous with Mars about 4 months after its current orbit, during which two or three midway corrections will be implemented……

Previous the last course correction … during On October 1st 2020, as China- People’s Republic of China also throughout the Chinese also the Asian Communities celebrates the National Day and Mid-Autumn Festival; CNSA China National Space Administration released China’s first Mars exploration mission Tianwen-1 exploration….. The image of the CNSA Belt and Road Initiative European Space Agency collaboration Martian Probe flying, the five-star red flag on the picture is dazzling, showing a bright Chinese red. This is the first deep space self-portrait of our country 天问一号 Martian probe. In the vast universe, the silver landing patrol device and the golden orbiter are shining brightly. Tianwen No.1 uses this to report safety to China and express birthday wishes.

As we all know, when taking selfies on the ground, you can use auxiliary tools such as selfie sticks to shoot after choosing the angle, light and shadow, but the selfie of “Tianwen No. 1” is not that simple. Due to its large size, if the selfie stick strategy is adopted, “Tianwen No.1” needs to use a 15-meter-long selfie stick to achieve a full-view selfie, which not only consumes resources, but is also prone to safety risks. For this reason, the Mars Orbiter Engineering Survey Sub-system Team of the Eighth Academy of Sciences proposed a “separated monitoring plan”, which is to “throw out” a light camera under suitable lighting conditions to take pictures of “Tianwen No. 1” and transmit the images in real time. Go back to the “Tianwen No. 1” probe.

Have you seen a one-time dual-head super wifi camera?………In order to successfully implement the separate monitoring program, the Eighth Academy Mars Orbiter Engineering Measurement Sub-system team needs a little guy who can “divide, shoot clearly, pass back, and hold on”: use a small, small, low-impact unlocking separation device The camera can be “divided out”; the use of colour imaging, the configuration of 800×600, 1600X1200 two-level resolution camera allows the image to be “clearly captured”; the use of super Wi-Fi communication that can achieve 400 meters of wireless communication allows data “Passed back”; the use of disposable batteries that can provide power for longer than 1 hour allows the camera to “hold on”, allowing the ground to see the full picture of the “Tianwen No. 1” rushing to the fire.

Considering that the camera may turn over as it gradually moves away from the detector, the development team designed the camera as a dual-headed front and back to ensure that the camera can capture as many detector images as possible during the turning process. After four years of research and development, this little guy weighing about 950g successfully carried the “Tianwen-1” Mars probe into space, and successfully separated the head weighing about 680g, and obtained a clear image. Successfully completed the overall visual monitoring task of “Tianwen No. 1”

The name “Tianwen”: 天問 ….. Comes from the long poem of the same name written by Qu Yuan (about 340–278 BC), one of the greatest poets of Ancient China. It is a poem of a series of questions starting with how the universe was created.

Images and visuals are from Weibo

#CNSA #ChinaNationalSpaceAdministration #國家航天局 |#BeltAndRoadinitiative #November2020 |#火星 # 天問 #天问一号 #LongMarch5 #ChangZheng5 #TianwenOne #MarsMission #Marslander #MarsRover #MarsProbe does a course November direction heading towards the #UtopiaPlanitia #Mars For collaborative exploration..

 

天问一号飞運騎遊達达3亿 ….As of the early morning Tuesday of November 17th, 2020, CNSA – China National Space Administration– ESA – European Space agency Belt and road initiative mars mission…first Mars exploration mission, Tianwen-1, has been in orbit for 116 days, with a flight mileage of more than 300 million kilometers. The earth is approximately 63.8 million kilometers. The detector’s attitude is stable, the energy is balanced, some sub-systems have completed self-checking, and each system is working normally.

 

During its orbital flight, Tianwen-1 has completed three midway corrections and one deep-space manoeuvre and other flight control tasks. In early November, the landing patrol vehicle entry module and multiple sub-systems of the Mars rover completed the first on-orbit self-check, and the results were normal.

Tianwen-1 is scheduled to reach Mars in February 2021 and carry out Mars capture. In May 2021, it will choose an opportunity to de-orbit, and the landing patrol will be separated from the orbiter, soft landing on the surface of Mars, the rover will leave the landing platform, and the inspection will be carried out…. For the Martian exploration..

Previously On the 9th October 2020 Friday 2300 hours Beijing time CNSA – China National Space Administration that under the control of the flight control team of China’s first Mars exploration mission, the main engine of the Tianwen-1 probe was ignited. In more than 480 seconds, the deep space maneuver was successfully completed. The orbital maneuver was carried out in deep space approximately 29.4 million kilometers from the earth. The orbit design of Tianwen-1 comprehensively considered various constraints from launch to Mars capture and made the propellant consumption as small as possible, and adopted the strategy of a deep space maneuver during the transfer process. The probe will rendezvous with Mars about 4 months after its current orbit, during which two or three midway corrections will be implemented……

Previous the last course correction … during On October 1st 2020, as China- People’s Republic of China also throughout the Chinese also the Asian Communities celebrates the National Day and Mid-Autumn Festival; CNSA China National Space Administration released China’s first Mars exploration mission Tianwen-1 exploration….. The image of the CNSA Belt and Road Initiative European Space Agency collaboration Martian Probe flying, the five-star red flag on the picture is dazzling, showing a bright Chinese red. This is the first deep space self-portrait of our country 天问一号 Martian probe. In the vast universe, the silver landing patrol device and the golden orbiter are shining brightly. Tianwen No.1 uses this to report safety to China and express birthday wishes.

As we all know, when taking selfies on the ground, you can use auxiliary tools such as selfie sticks to shoot after choosing the angle, light and shadow, but the selfie of “Tianwen No. 1” is not that simple. Due to its large size, if the selfie stick strategy is adopted, “Tianwen No.1” needs to use a 15-meter-long selfie stick to achieve a full-view selfie, which not only consumes resources, but is also prone to safety risks. For this reason, the Mars Orbiter Engineering Survey Sub-system Team of the Eighth Academy of Sciences proposed a “separated monitoring plan”, which is to “throw out” a light camera under suitable lighting conditions to take pictures of “Tianwen No. 1” and transmit the images in real time. Go back to the “Tianwen No. 1” probe.

Have you seen a one-time dual-head super wifi camera?………In order to successfully implement the separate monitoring program, the Eighth Academy Mars Orbiter Engineering Measurement Sub-system team needs a little guy who can “divide, shoot clearly, pass back, and hold on”: use a small, small, low-impact unlocking separation device The camera can be “divided out”; the use of colour imaging, the configuration of 800×600, 1600X1200 two-level resolution camera allows the image to be “clearly captured”; the use of super Wi-Fi communication that can achieve 400 meters of wireless communication allows data “Passed back”; the use of disposable batteries that can provide power for longer than 1 hour allows the camera to “hold on”, allowing the ground to see the full picture of the “Tianwen No. 1” rushing to the fire.

Considering that the camera may turn over as it gradually moves away from the detector, the development team designed the camera as a dual-headed front and back to ensure that the camera can capture as many detector images as possible during the turning process. After four years of research and development, this little guy weighing about 950g successfully carried the “Tianwen-1” Mars probe into space, and successfully separated the head weighing about 680g, and obtained a clear image. Successfully completed the overall visual monitoring task of “Tianwen No. 1”

The name “Tianwen”: 天問 ….. Comes from the long poem of the same name written by Qu Yuan (about 340–278 BC), one of the greatest poets of Ancient China. It is a poem of a series of questions starting with how the universe was created.

Images and visuals are from Weibo

#CNSA #ChinaNationalSpaceAdministration #國家航天局 |#BeltAndRoadinitiative #October2020 |#火星 # 天問 #天问一号 #LongMarch5 #ChangZheng5 #TianwenOne #MarsMission #Marslander #MarsRover #MarsProbe does the ultimate #Selfies #SpaceSelfie heading towards the #UtopiaPlanitia #Mars For #中秋节 #MidAutumnFestival #ChinaNationalDay …

On October 1st 2020, as China- People’s Republic of China also throughout the Chinese also the Asian Communities celebrates the National Day and Mid-Autumn Festival, CNSA China National Space Administration released China’s first Mars exploration mission Tianwen-1 exploration….. The image of the CNSA Belt and Road Initiative European Space Agency collaboration Martian Probe flying, the five-star red flag on the picture is dazzling, showing a bright Chinese red. This is the first deep space self-portrait of our country 天问一号 Martian probe. In the vast universe, the silver landing patrol device and the golden orbiter are shining brightly. Tianwen No.1 uses this to report safety to China and express birthday wishes.

Since this CNSA China – PROC’s first independent Mars exploration project was established, how to do a good job of visual monitoring of the working status of the Mars rover in orbit has become one of the important tasks facing the development team. In order to obtain the full picture of the “Tianwen No. 1” in the process of rushing to the fire, the Mars Orbiter Engineering Measurement Sub-system Team of the Eighth Academy specially designed a set of “little guys” with “small quality, small size and low energy consumption” “Composed of monitoring system.

As we all know, when taking selfies on the ground, you can use auxiliary tools such as selfie sticks to shoot after choosing the angle, light and shadow, but the selfie of “Tianwen No. 1” is not that simple. Due to its large size, if the selfie stick strategy is adopted, “Tianwen No.1” needs to use a 15-meter-long selfie stick to achieve a full-view selfie, which not only consumes resources, but is also prone to safety risks. For this reason, the Mars Orbiter Engineering Survey Sub-system Team of the Eighth Academy of Sciences proposed a “separated monitoring plan”, which is to “throw out” a light camera under suitable lighting conditions to take pictures of “Tianwen No. 1” and transmit the images in real time. Go back to the “Tianwen No. 1” probe.

Have you seen a one-time dual-head super wifi camera?

In order to successfully implement the separate monitoring program, the Eighth Academy Mars Orbiter Engineering Measurement Sub-system team needs a little guy who can “divide, shoot clearly, pass back, and hold on”: use a small, small, low-impact unlocking separation device The camera can be “divided out”; the use of colour imaging, the configuration of 800×600, 1600X1200 two-level resolution camera allows the image to be “clearly captured”; the use of super Wi-Fi communication that can achieve 400 meters of wireless communication allows data “Passed back”; the use of disposable batteries that can provide power for longer than 1 hour allows the camera to “hold on”, allowing the ground to see the full picture of the “Tianwen No. 1” rushing to the fire.

Considering that the camera may turn over as it gradually moves away from the detector, the development team designed the camera as a dual-headed front and back to ensure that the camera can capture as many detector images as possible during the turning process. After four years of research and development, this little guy weighing about 950g successfully carried the “Tianwen-1” Mars probe into space, and successfully separated the head weighing about 680g, and obtained a clear image. Successfully completed the overall visual monitoring task of “Tianwen No. 1”

The name “Tianwen”: 天問 ….. Comes from the long poem of the same name written by Qu Yuan (about 340–278 BC), one of the greatest poets of Ancient China. It is a poem of a series of questions starting with how the universe was created….

Images and visuals are from Weibo

#CNSA #ChinaNationalSpaceAdministration #國家航天局 |#BeltAndRoadinitiative #September2020 |#火星 # 天問 #天问一号 #LongMarch5 #ChangZheng5 #TianwenOne #MarsMission #Marslander #MarsRover #MarsProbe completed the second midway correction of orbit towards the #UtopiaPlanitia #Mars …..

 

2020 at 23:20 on September 21st day in China – Peoples ’Republic of China CNSA –China National Space Administration, The Belt and Road Imitative ESA –European Space Agency Mars Mission   under the operation, asked the first Mars mission flight control team 1 spacecraft is four 120N engine ignition at the same time for 20 seconds, and the successful completion of the second track midway amended, and The actual performance of the 120N engine was verified on orbit….

Up to now, Tianwen-1 has been in orbit for 60 days, about 19 million kilometres away from the earth, with a flight mileage of about 160 million kilometres. The detector systems are in good condition, and the ground-based measurement and control communication centers and stations track normally. Midway correction refers to the correction of the orbit deviation caused by various reasons during the flight of the probe, so that the probe can fly closer to the theoretical orbit. The accuracy of Tianwen-1’s launch into orbit and the first midway correction is very high, and the amount of correction this time is very small…..

The name “Tianwen”: 天問 ….. comes from the long poem of the same name written by Qu Yuan (about 340–278 BC), one of the greatest poets of Ancient China. It is a poem of a series of questions starting with how the universe was created.

2020年9月20日23时,在我国首次火星探测任务飞行控制团队操作下,天问一号探测器4台120N发动机同时点火工作20秒,顺利完成第二次轨道中途修正,并在轨验证了120N发动机实际性能。

截至目前,天问一号已在轨飞行60天,距离地球约1900万千米,飞行里程约1.6亿千米,探测器各系统状态良好,地面测控通信各中心和台站跟踪正常。中途修正是指在探测器飞行过程中,对各种原因导致的轨道偏离进行修正,使探测器更贴近理论轨道飞行。天问一号发射入轨和第一次中途修正的精度很高,本次修正量很小。
​​​​

Previously On 17th July 2020 today on a clear summery day at Wenchang Spacecraft Launch Center at Hainan Province- China- People’s Republic of China  one of many CNSA –China National Space Administration .. In which on an early morning day it was the first realize deployment of the Long March 5 Y4- Chang Zheng 5 Y4 among with the Tianwen One Martian Rover and Lander in which is set to launch on 23rd July 2020.. Or within the Late July August Launch Window…  The Belt and Road Initiative Martian program named Tianwen-1″ consists of three parts: an orbiter, a lander, and a patrol device, with a total mass of about 5 tons. The three major tasks of “winding, landing and patrolling” will be completed in one go….

 

Among it as a The Belt and Road Initiative Martian Tianwen One program- The planetary exploration engineering logo is printed on the front of the Long March 5 Yaosi Chang Zheng 5 Yaosi carrier rocket fairing, and the umbilical cord tower side The logos on the side are: China National Space Administration (CNSA), European Space Agency (ESA), French National Space Research Center (CNES), Argentine National Space Council (CONAE), Austrian Research Promotion Agency (FFG). 

It is the  fourth Long March 5 Yaosi Chang Zheng 5 Yaosi carrier rocket to be used to launch China’s first Mars exploration mission, was vertically transported to the launching area at the Wenchang Space Launch Center in south China’s Hainan Province on Friday. In which previously order to meet the needs of the mission, Xi’an Satellite Measurement and Control Center has recently adapted the ground measurement and control communication system. At present, the renovation work and various targeted tests have been fully completed, and the performance indicators meet the mission needs of “Tianwen No. 1”. When the “Tianwen 1” Mars probe successfully entered the earth fire turn…It’ll enter towards its landing site the Utopia Planitia  of  landing attempt, with each site having a landing ellipse of approximately 100 by 40 kilometres….

The new Chinese Mars spacecraft, consisting of an orbiter and a lander (with an attached rover) is developed by the China Aerospace Science and Technology Corporation (CASC), and managed by the National Space Science Centre (NSSC) in Beijing. The lander portion of the spacecraft will use a parachute, retrorockets, and an airbag in order to achieve landing on the Martian surface. If the landing is successful, the lander would then release a rover. Said rover will be powered by solar panels and is expected to probe the Martian surface with radar and to perform chemical analyses on the soil; it would also look for biomolecules and biosignatures. ….

The aims of the mission may include the following: find evidence for current and past life, produce Martian surface maps, characterize Martian soil composition and water ice distribution, examine the Martian atmosphere, and in particular, its ionosphere, among others. Simulated Martian landings have been performed as part of mission preparations by the Beijing Institute of Space Mechanics and Electricity…..

During this year, it was China Space Day there was many Celebrations across the country, in which of the light of Covid-19 been contained … in which that didn’t deter celebrating country wide celebrating is a while worthy project in which is the first country’s mission to Mars, finally named on 24th April 2020 is Mars exploration mission named Tianwen No. 1 【转转! 火星 我们 来 了 [加油] at present, China CNSA – China National Space Administration among with its sister organisation is carrying out the development of the first Mars exploration project. According to the plan, in 2020, China will launch the Mars Rover through the Long March V, and achieve Mars orbit, landing and patrol detection through one launch. After the probe is launched, it will take about 7 months to reach Mars…..