On the 5th November 2022 hour in CNSA _China National Space Administration -China – People’s Republic of China At early morning 1950 hours Hong Kong –Beijing Time China- People’s Republic of China successfully launched Zhongxing 19 satellite with the Long March 3B carrier rocket at the Xichang Satellite Launch Center Sichuan Province, China – People’s Republic of China, and the satellite went smoothly. Entering the predetermined orbit, the launch mission was a complete success. The satellite mainly provides communication services for the important trans-Pacific routes, the eastern Pacific waters and the west coast of North America and other coverage areas. The mission is the 447th flight of the Long March series of launch vehicles.
The Zhongxing 19 satellite was developed by the General Manager of the Fifth Academy of China Aerospace Science and Technology Corporation. It is a high-throughput communication satellite with the characteristics of fast transmission rate and wide coverage. The satellite adopts my country’s China, Republic of China self-developed Dongfanghong-4 enhanced satellite platform, which mainly provides services such as communication and Internet access. Zhongxing 19 satellite covers multi-band communication loads such as C, Ku and Ka, mainly covering eastern China, Southeast Asia, and most of the Pacific region including North American routes, which can better serve ocean transportation communications, route Internet, etc. business.
China Satcom, a subsidiary of China Aerospace Science and Technology Corporation, is responsible for purchasing and in-orbit operation and management of the Zhongxing 19 satellite.
Images and visuals are from Weibo also their respectives.
The CNSA –China National Space Administration China Space Station Mengtian Experiment Module and the space station combination completed the rendezvous and docking in orbit After the space station Mengtian Experiment Module was launched into orbit, at 4:27 on November 1st Tuesday, 2022 Hong Kong SAR- Beijing time, it was successfully docked in front of the Tianhe core module To the port, the entire rendezvous and docking process lasted about 13 hours. In the follow-up, the relocation of the Mengtian experimental module will be implemented as planned. The Mengtian experimental module will form the basic configuration combination of the “T” shape of the space station with the Tianhe core module and the Wentian experimental module.
The Mengtian experimental module is expected to be repositioned on November 3. After the relocation is completed, it will form a “T” basic configuration combination of the space station with the Tianhe core module and the Wentian experimental module.
On the 3rd November 2022 Morning 0932 Morning Hong Kong SAR –Beijing time The “T” shape is assembled! The space station Mengtian experimental module successfully completed the transposition China Space Station T-shaped basic configuration on-orbit assembly completed Beijing time on November 3, 2022 at 9:32; the space station Mengtian experimental module successfully completed the transposition.
During the transposition, the Mengtian experimental module first completed the relevant state settings, and then separated from the space station assembly. After that, the plane transposition method was used to complete the transposition in about an hour, and then docked with the lateral port of the Tianhe core module node cabin again. This afternoon, the Shenzhou 14 astronaut crew will enter the Mengtian experimental module.
The completion of the transposition of the Mengtian experimental module marks the completion of the on-orbit assembly of the basic configuration of the “T” shape of the Chinese space station, a key step towards the goal of building a space station. According to the plan, the basic function test and evaluation of the space station assembly will be carried out in the future
The Mengtian experimental cabin is equipped with a cargo airlock and an outboard deployment test platform. In the future, the scientific test equipment that needs to be installed outside the cabin can be transported to the space station through a cargo spacecraft, and then the load will be sent to the outside of the cabin through the cargo airlock, and the robotic arm or astronaut will install it on the platform outside the cabin. Realize the continuous update of the extravehicular test project.
The CNSA –China National Space Administration China Space Station Mengtian Experiment Module and the space station combination completed the rendezvous and docking in orbit After the space station Mengtian Experiment Module was launched into orbit, at 4:27 on November 1st Tuesday, 2022 Hong Kong SAR- Beijing time, it was successfully docked in front of the Tianhe core module To the port, the entire rendezvous and docking process lasted about 13 hours. In the follow-up, the relocation of the Mengtian experimental module will be implemented as planned. The Mengtian experimental module will form the basic configuration combination of the “T” shape of the space station with the Tianhe core module and the Wentian experimental module.
The Mengtian experimental module is expected to be repositioned on November 3. After the relocation is completed, it will form a “T” basic configuration combination of the space station with the Tianhe core module and the Wentian experimental module.
In the follow-up, the Mengtian experimental module will rendezvous and dock with the space station assembly according to the predetermined procedure. After completing the relevant functional tests, the Mengtian experimental cabin will be repositioned as planned. The Shenzhou 14 astronaut crew is ready to welcome the visit of the Mengtian experimental module.
The Mengtian experimental cabin is the third section of the Chinese space station and the second scientific experimental cabin. It consists of a working cabin, a load cabin, a cargo airlock cabin and a resource cabin. The take-off weight is about 23 tons. It is mainly used for space science and Applying experiments, participating in the management of the space station assembly; the cargo airlock can support the automatic entry and exit of cargo, and provide support for scientific experiments inside and outside the cabin.
In the follow-up, the Mengtian experimental module will rendezvous and dock with the space station assembly according to the predetermined procedure. After completing the relevant functional tests, the Mengtian experimental cabin will be repositioned as planned. The Shenzhou 14 astronaut crew is ready to welcome the visit of the Mengtian experimental module.
The Mengtian experimental cabin is equipped with a cargo airlock and an outboard deployment test platform. In the future, the scientific test equipment that needs to be installed outside the cabin can be transported to the space station through a cargo spacecraft, and then the load will be sent to the outside of the cabin through the cargo airlock, and the robotic arm or astronaut will install it on the platform outside the cabin. Realize the continuous update of the extravehicular test project.
On the 31st October 2022CNSA –China National Space Administration The Mengtian The launch of the Mengtian experimental module is imminent successfully launched on At 15:37 Hours on October 31, 2022, Beijing time, the Chang Zheng Long March 5B Yao-4 carrier rocket carrying the Tiangong China Space Station Mengtian Experimental Module was launched in Wenchang Spacecraft Launch Center-Hainan Province, China People’s Republic of China . The field was ignited and launched on time. About 8 minutes later, the Mengtian experimental module was successfully separated from the rocket and accurately entered the predetermined orbit. The launch mission was a complete success.
This is the 25th flight mission since the establishment of my country’s manned space project, and the 446th flight of the Long March series of carrier rockets.
The China Space Station Mengtian Experiment Module and the space station combination completed the rendezvous and docking in orbit After the space station Mengtian Experiment Module was launched into orbit, at 4:27 on November 1st Tuesday, 2022 Hong Kong SAR- Beijing time, it was successfully docked in front of the Tianhe core module To the port, the entire rendezvous and docking process lasted about 13 hours. In the follow-up, the relocation of the Mengtian experimental module will be implemented as planned. The Mengtian experimental module will form the basic configuration combination of the “T” shape of the space station with the Tianhe core module and the Wentian experimental module.
The Mengtian experimental module is expected to be repositioned on November 3. After the relocation is completed, it will form a “T” basic configuration combination of the space station with the Tianhe core module and the Wentian experimental module.
In the follow-up, the Mengtian experimental module will rendezvous and dock with the space station assembly according to the predetermined procedure. After completing the relevant functional tests, the Mengtian experimental cabin will be repositioned as planned. The Shenzhou 14 astronaut crew is ready to welcome the visit of the Mengtian experimental module.
The Mengtian experimental cabin is the third section of the Chinese space station and the second scientific experimental cabin. It consists of a working cabin, a load cabin, a cargo airlock cabin and a resource cabin. The take-off weight is about 23 tons. It is mainly used for space science and Applying experiments, participating in the management of the space station assembly; the cargo airlock can support the automatic entry and exit of cargo, and provide support for scientific experiments inside and outside the cabin.
In the follow-up, the Mengtian experimental module will rendezvous and dock with the space station assembly according to the predetermined procedure. After completing the relevant functional tests, the Mengtian experimental cabin will be repositioned as planned. The Shenzhou 14 astronaut crew is ready to welcome the visit of the Mengtian experimental module.
The Mengtian experimental cabin is equipped with a cargo airlock and an outboard deployment test platform. In the future, the scientific test equipment that needs to be installed outside the cabin can be transported to the space station through a cargo spacecraft, and then the load will be sent to the outside of the cabin through the cargo airlock, and the robotic arm or astronaut will install it on the platform outside the cabin. Realize the continuous update of the extravehicular test project.
On the 31st October 2022CNSA –China National Space Administration The Mengtian The launch of the Mengtian experimental module is imminent successfully launched on At 15:37 Hours on October 31, 2022, Beijing time, the Chang Zheng Long March 5B Yao-4 carrier rocket carrying the Tiangong China Space Station Mengtian Experimental Module was launched in Wenchang Spacecraft Launch Center-Hainan Province, China People’s Republic of China . The field was ignited and launched on time. About 8 minutes later, the Mengtian experimental module was successfully separated from the rocket and accurately entered the predetermined orbit. The launch mission was a complete success.
This is the 25th flight mission since the establishment of my country’s manned space project, and the 446th flight of the Long March series of carrier rockets.
The Mengtian experimental cabin is the third section of the Chinese space station and the second scientific experimental cabin. It consists of a working cabin, a load cabin, a cargo airlock cabin and a resource cabin. The take-off weight is about 23 tons. It is mainly used for space science and Applying experiments, participating in the management of the space station assembly, the cargo airlock can support the automatic entry and exit of cargo, and provide support for scientific experiments inside and outside the cabin.
In the follow-up, the Mengtian experimental module will rendezvous and dock with the space station assembly according to the predetermined procedure. After completing the relevant functional tests, the Mengtian experimental cabin will be repositioned as planned. The Shenzhou 14 astronaut crew is ready to welcome the visit of the Mengtian experimental module.
The Mengtian experimental cabin is the third section of the Chinese space station and the second scientific experimental cabin. It consists of a working cabin, a load cabin, a cargo airlock cabin and a resource cabin. The take-off weight is about 23 tons. It is mainly used for space science and Applying experiments, participating in the management of the space station assembly; the cargo airlock can support the automatic entry and exit of cargo, and provide support for scientific experiments inside and outside the cabin.
In the follow-up, the Mengtian experimental module will rendezvous and dock with the space station assembly according to the predetermined procedure. After completing the relevant functional tests, the Mengtian experimental cabin will be repositioned as planned. The Shenzhou 14 astronaut crew is ready to welcome the visit of the Mengtian experimental module.
The Mengtian experimental cabin is equipped with a cargo airlock and an outboard deployment test platform. In the future, the scientific test equipment that needs to be installed outside the cabin can be transported to the space station through a cargo spacecraft, and then the load will be sent to the outside of the cabin through the cargo airlock, and the robotic arm or astronaut will install it on the platform outside the cabin. Realize the continuous update of the extravehicular test project.
