Tag: Solid rocket booster

#CNSA #ChinaNationalSpaceAdministration #国家航天局 | #BRI #December2022|#太原卫星发射中心  #TaiyuanSatelliteLaunchCenter  –  International #CASC #ChinaAerospaceScienceAndTechnologyCorporation  #SmartDragon3 #CarrierRocket #Jielong3 #CarrierRocket Ecosystem look like ……..?

kevinjamesngLeave a comment

At 1435 Hours Hong Kong SAR- Beijing Time on An early morning of 9th December 2022 , China- People’s Republic of China- CNSA –China National Space Administration   CASC China Aerospace Science and Technology Corporation  Successfully launched  the New Next Generation ChinaRocket Co. LTD  Smart Dragon –  Jielong three Carrier Rocket  carrier rocket at the Taiyuan Satellite Launch Center Shanxi Province rocket successfully launched from a sea borne mobile launch platform…..  Launching 14 satellites in one payload launch..  from the Yellow Sea it was an off shore launch to forward test case of mobile launch platform on series of larger launch carrier rocket in the process of its developmentally stage also provides a best longitude/ latitude minimum distance to launch at optimum orbitally solution …

China Aerospace Science and Technology Corporation….What does the new rocket Jielong III look like?

杰龙三号运输火重成功  What does the new rocket “Jielong III- Smart Dragon” look like? Chinese launch vehicle family has added a new member! The Jielong-3 carrier rocket has a total length of 31.8 meters, a maximum diameter of 2.65 meters, a take-off mass of 140 tons, and a carrying capacity of 1.5 tons in a 500-kilometer sun-synchronous orbit. It supports land-based and sea-based rapid launches. The rocket has a diameter of 2.9 meters and a diameter of 3.35 meters. The mission is cost-effective and applicable. It has the launch capability of “one arrow with 20 satellites”. The launch can provide reliable, convenient and economical exclusive launch, fixed-orbit launch and loading services for domestic and foreign commercial satellite users for constellation networking, network replenishment, and payload verification.

The total length of the Jielong-3 rocket is about 31 meters, the largest diameter of the rocket body is 2.65 meters, the smallest diameter is 2 meters, and the total mass is about 140 tons. The rocket is a series layout of four-stage solid motors. Among them, the high-performance fiber-wound composite shell integral solid motor with the largest charge and the largest thrust developed by the Fourth Research Institute of Aerospace Science and Technology Group is adopted. The diameter of the engine is 2.65 meters. 71 tons, the thrust reaches 200 tons.
At the same time, the Jielong-3 rocket also has two configurations of fairings with a diameter of 3.35 meters and 2.9 meters, which can be adapted to various satellite rocket interfaces and meet various satellite installation requirements.

The rocket is arranged in series with four solid motors. Jin Xin, the commander-in-chief of the Jielong-3 rocket, introduced that the successful first flight of the Jielong-3 rocket has effectively promoted the serialization of my country’s solid launch vehicles. At present, the Jielong series of rockets have a carrying capacity of 200 kilograms to 1.5 tons in a 500-kilometer sun-synchronous orbit.


Jin Xin introduced: At present, we are planning a larger-scale Jielong-4 solid launch vehicle, with a carrying capacity of 2.5 tons in a 500-kilometer sun-synchronous orbit, and actively exploring the sea launch capability of liquid rockets. In the future, we will achieve a more complete “both cooling and heating” ‘Solid-liquid compatible’, ‘fixed + manoeuvrable’, ‘multiple launch at once’ sea launch capability.

Images and visuals are from their Respectives CMS China Manned SpaceCNSA-China National Space Administration

#MadeInChina #中國製造 #ExPace | #November2022太原卫星发射中心  #TaiyuanSatelliteLaunchCenter  #CASIC Rocket Technology Company #Expace #PrivateChineseSpaceCompany #Wuhan #CarrierRocketCompany #CarrierRocket #Kuaizhou  11 #KX11 The capacity of the new “space courier” has been upgraded! What “big moves” will my country’s commercial spaceflight have?

kevinjamesngLeave a comment

Currently at the moment 中國製造 Expace Technology Corporation- a CASIC -China aerospace science and industry corporation has been very busy in building a New Carrier Rocket Factory in Wuhan National Aerospace Industrial Base in which the base will be in operations in May 2020   Kuaizhou Rocket Industrial Park that forms the manufacturing of twenty plus more Kuaizhou Rockets also its other sister larger carrier rockets in process of The assembly test capability of 20 solid launch vehicles……in which is now in operation……

 On November 2022 The capacity of the new “space courier” has been upgraded and Kuaizhou two  is planned to launch at the end of the year…..  In the rocket industrial park of Wuhan National Aerospace Industry Base, it only takes a few days to complete the assembly of a rocket, and it takes about seven days. Complete the final assembly test and deliver to the launch base for launch. Kuaizhou-11, a new generation of solid carrier rocket developed by China Aerospace Science and Industry Corporation, has arrived at the launch site and is scheduled to launch at the end of the year. Compared with the Kuaizhou-1A rocket currently used for commercial space launches, this new solid carrier rocket has Ability has been greatly improved. From two hundred kilograms to one ton, Kuaizhou 11 not only increased its capacity, but also loaded more satellites into space.


At present, As a new engine for high-end equipment, launch vehicles are the focus of competition among countries. In the future, how will my country China, People’s Republic of China exert its strength in the field of commercial aerospace? Let’s pay attention together…..

Images and visuals are from Weibo also from their respectives..

#CNSA #ChinaNationalSpaceAdministration #国家航天局 |#中國航天 #CASC #ChinaAerospaceScienceAndTechnologyCorporation #October2021| Successfully test fired a large #SRB #SolidRocketBooster #CarrierRocket engine Motor with the world’s largest thrust for Multipurpose mobile launcher ecosystems….  

kevinjamesngLeave a comment

On 19th October 2021 CASC China Aerospace Science and Technology Corporation at Xi’an Shanxi province – one of Many Ancient Capitals of China – People’s Republic of China, in which CASC  Department division Fourth Academy of Aerospace Engineering have successfully test a large Solid Rocket Booster engine motor system, in which providing the world’s largest thrust, highest impulse-mass ratio, and easy-to-use integral solid rocket motor with a diameter of 3.5 meters, a charge of 150 tons, and a thrust of 500 tons….. The success of the test opened up the key technology link for the development of China’s thousand-ton solid thrust engine.

[500-ton monolithic solid rocket engine test run video] The ground hot test run of an integral solid rocket engine with the largest thrust, highest impulse-mass ratio and easy-to-try in the world independently developed by the Fourth Academy of China Aviation was successfully completed in Xi’an.

The Major breakthrough! The world’s largest thrust monolithic solid rocket engine was successfully tested in the Fourth Academy of Aviation Industry of China…. The SRB –Solid Rocket Booster Engine motor ecosystem..  The engine has a diameter of 3.5 meters and a thrust of 500 tons. It adopts a number of advanced technologies and the overall performance of the engine has reached the world’s leading level. The success of the test indicates that China’s solid carrying capacity has been greatly improved, and is of great significance to the promotion of the development of large and heavy launch vehicle technology in the future for various launch Solid Rocket Carrier Rockets in operationally launch in various key launch Platforms situations in which are to optimised a low cost high quality launch whether it’s on mobility on land or at Marine launching conditions.

Images and visuals are from Weibo also their respectives.

#MadeInChina #中國製造 #ExPace | #August2021| #CASIC Rocket Technology Company #Expace #PrivateChineseSpaceCompany – is preparing its hallmark two #Wuhan #CarrierRocketCompany #CarrierRocket #Kuaizhou 1A #KX1A Launches for its #September launch Schedule ….

kevinjamesngLeave a comment

On 23th August 2021 Hong Kong SAR- Beijing time, China – People’s Republic of China  Expace China Aerospace Science and Industry Corporation will use the Kuaizhou-1A carrier rocket at the Jiuquan Satellite Launch Center to launch for the September launch Calendar Schedule ..

Via Hubei News Currently the Expace Hallmark Carrier rocket the Kuaizhou Carrier Rocket in which launching from it currently launch complex Jiuquan Satellite Launch Center- Inner Mongolia – China- People’s Republic of China… during the week of 21st August 2021, at the Kuaizhou General Assembly Center in Wuhan National Aerospace Industry Base, Kuaizhou-1 has completed the final assembly test, and is about to set off to Jiuquan for launch and fulfilment tasks….. Among them, Yaowujian was named “Kuaizhou Xinzhou” to commemorate the “Han-made” solid carrier rocket that rolled off the assembly line in Xinzhou District, Wuhan…..  Through launch and operation, the Wuhan National Aerospace Industry Base has become well-known nationally and globally.

Images and visuals are from Weibo Also their Respectives.

#CNSA #ChinaNationalSpaceAdministration #国家航天局 |#BeltAndRoadinitiative #December2020 | #Xian – testing out the newest largest #SRB #SolidRocketBooster Segment development to deploy larger payloads ……

kevinjamesngLeave a comment

 

A successful testing on an early Morning  Hong Kong- Beijing time on 30th December 2020 CNSA –China National Space Administration in its Xian testing facilities in which China-People’s Republic of China largest thrust segmented solid rocket engine successfully tested……. This morning, China-People’s Republic of China ‘s first civil aerospace development of China’s first 3.2m3 segmented large solid rocket boosted engine completed the first interview in Xi’an, which is the largest thrust in my country so far Segmented solid rocket motor. The solid engine thrust of this test run reached 260 tons, and the ignition time exceeded 130 seconds.

In the future, it can be applied to my country’s large and heavy rockets to meet the different development needs of my country’s space equipment, manned moon landing, and deep space exploration

China-People’s Republic of China largest thrust segmented solid rocket engine successfully tested] This morning, my country’s first civil aerospace development of China’s first 3.2m3 segmented large solid rocket boosted engine completed the first interview in Xi’an, which is the largest thrust in my country so far Segmented solid rocket motor.


In the future, it can be applied to my country’s large and heavy rockets to meet the different development needs of my country’s space equipment, manned moon landing, and deep space exploration. The solid engine used in this test run has a maximum thrust of 260 tons and adopts a three-stage design. This segmented design can adjust the charge to achieve the coverage of different thrusts, which can meet the needs of the launch vehicle to carry different loads in the future.

Images and visuals are from Weibo..