Tag: Pallas 1

#MadeInChina #中國製造 #中國 | #星河动力空间科技有限公司#GalacticEnergy #July 2024|#CarrierRocketShopping Progress of#智神星一号 #Pallas1 #CarrierRocket  successfully completed a series of fairing tests.  

kevinjamesngLeave a comment

星河动力空间科技有限公司 Galactic Energy-  Galaxy Power (Beijing) Space Technology Co., Ltd. Located in Block D, Aviation Technology Plaza, E-Town, and Beijing – Beijing – China – People’s Republic of China ….Galaxy Aerospace is the first private aerospace company in China to achieve successful continuous launches, the first to send commercial networked satellites into a 500km sun-synchronous orbit, and the first to master the ability to launch multiple satellites with one carrier rocket.

[The Pallas-1 launch vehicle successfully completed a series of fairing tests]

On the 25th July 2024 The latest news from Galaxy Power; Recently, the company completed a series of static, modal, and separation tests on the Pallas-1 launch vehicle fairing, all of which were successful. The Pallas-1 series of launch vehicles are compatible with fairings with diameters of 3.35m, 4.2m, and 5.2m to meet the needs of different satellite customers. The fairing used in this test is one of the series of fairing products independently developed and designed by Galaxy Power, and is consistent with the status of the Pallas-1 Yao-1 flight test product.

The Pallas- 1 has a maximum low-orbit carrying capacity of 8 tons, with seven 50-ton liquid oxygen-kerosene engines in parallel in the first stage. It is scheduled to make its maiden flight at the end of this year….

Recently , Galaxy Aerospace completed a series of static, modal and separation tests on the fairing of the Pallas-1 launch vehicle, and all the tests were a complete success!

 The Pallas-1 series of launch vehicles are compatible with fairings with diameters of 3.35m, 4.2m, and 5.2m to meet the needs of different satellite customers. The fairing used in this test is one of the series of fairing products independently developed and designed by Galaxy Power, and is consistent with the Pallas-1 Yao-1 flight test product. The fairing adopts a von Karman shape, which has the advantages of low flight aerodynamic resistance, light structural mass and easy operation.

The fairing end cap is made of high-strength ablation-resistant composite material, a large area of ​​honeycomb sandwich composite material structure, and a metal frame structure at the rear. The fairing separation system adopts a “hinge-spring” half-cover rotation separation scheme, and the lateral and longitudinal separation unlocking devices both use point-type explosive bolts, which have small impact during the separation process and high separation reliability.

The static test of the fairing assessed the fairing’s ability to resist external loads and verified the structural strength. The test achieved the intended purpose and obtained relevant data. The modal test obtained the fairing’s modal parameters, providing a basis for structural dynamics model modification and fairing separation calculation.
 

The fairing separation test fully verified the correctness of the fairing separation system design, obtained the collision boundary data between the fairing separation body and the payload, assessed the adaptability of the structural system to the separation concentrated force load and the impact load of pyrotechnics, and obtained important mechanical environment parameters.

The complete success of the fairing series tests indicates that Galaxy Aerospace has the ability to quickly design, analyze and test large liquid rocket fairings, laying a solid foundation for the company’s subsequent model development.

Imagines and Visuals are from their respectives..

#MadeInChina #中國製造 #中國 | #星河动力 #GalacticEnergy #July2023|#CarrierRocketShopping #智神星一号#PALLASONE #ReusableCarrierRocket #CarrierRocket Successfully vertical and landing #火鸟一号#FirebirdOne scaling verification final stage recovery algorithm​​​​….

kevinjamesngLeave a comment

星河动力空间科技有限公司 Galactic Energy-  Galaxy Power (Beijing) Space Technology Co., Ltd. Located in Block D, Aviation Technology Plaza, E-Town, and Beijing – Beijing – China – People’s Republic of China ….Galaxy Aerospace is the first private aerospace company in China to achieve successful continuous launches, the first to send commercial networked satellites into a 500km sun-synchronous orbit, and the first to master the ability to launch multiple satellites with one carrier rocket.

Recently on the week of 25th July 2023, 星河动力 Galactic Energy – Galaxy Power…. Successfully has made staged progress in the preliminary test and verification of the rocket terminal vertical recovery control technology based on the scaled platform, completed the tracking landing test of the pre-installed optimal descent trajectory, and verified that the platform is in a stable state during the flight. In the future, the online trajectory planning landing test based on convex optimization will continue to be carried out to verify the vertical recovery landing control algorithm. The engine is powered, but the landing legs are really cool……!!!

The Testing relates to the Galaxy Power’s 智神星一号 PALLAS ONE Reusable Carrier Rocket in which carries智神星一号 PALLAS ONE carrier rocket vertical recovery control technology scaling verification platform ” 火鸟一号 Fire Bird No. 1″, successfully completed the early scaling verification of the rocket’s final stage recovery algorithm​​​​….

Recently, the first full-system hot test of the智神星一号 PALLAS ONE Reusable Carrier Rocket launch vehicle’s auxiliary power system was a complete success.

In July 2023, Galaxy Power Aerospace Co., Ltd. made phased progress in the preliminary test and verification of the rocket terminal vertical recovery control technology based on the scaling platform, and completed the tracking and landing test of the pre-installed optimal descent trajectory. It verified that the state of the platform was stable during the flight. In the future, the online trajectory planning landing test based on convex optimization will continue to be carried out to verify the vertical recovery landing control algorithm.

The scale-down verification platform named “Firebird-1” is a scale-down verification platform (aeroengine power) for the vertical recovery control technology of智神星一号 PALLAS ONE Reusable Carrier Rocket. It is mainly used to verify the navigation, guidance, and control technologies and algorithms related to the final stage of vertical recovery of the rocket, and provide technical exploration and support for the development of corresponding products in the future.

The “Firebird” recycling technology verification platform planned by the company includes the “Firebird No. 1” scale-down verification platform based on aerodynamic power and the “Firebird No. 6” full-scale verification platform based on a self-developed liquid oxygen kerosene rocket engine. The control, stand-alone, structure, engine and other technologies for the recovery and use of “智神星一号 PALLAS ONE Reusable Carrier Rocket ” will be carried out in stages on the “Firebird” series of verification platforms to carry out technical verification. While ensuring the test and commercial launch of “智神星一号 PALLAS ONE Reusable Carrier Rocket “, the research and verification of recovery technology will be steadily promoted.

“智神星一号 PALLAS ONE Reusable Carrier Rocket” is a medium-to-large reusable liquid launch vehicle independently developed by星河动力 Galactic Energy – Galaxy Power….. It is mainly aimed at the market demand for large-scale constellation networking. It can provide a low-orbit transport capacity of no less than 5 tons. The extended bundled low-orbit transport capacity can reach 14 tons. The number of reuses is designed to be 50 times.

“智神星一号 PALLAS ONE Reusable Carrier Rocket ” is the first commercial launch vehicle in China that adopts a circular parallel recovery configuration of 7 engines. It adopts a center, 6 evenly distributed circumferentially, and a full two-way swing scheme, combined with the company’s self-developed CQ-50 liquid oxygen kerosene engine. The depth variable thrust capability (35%~110%) not only meets the requirements of vertical recovery and reuse, but also has power redundancy capabilities, that is, the other 6 engines can ensure normal flight into orbit in the event of any engine failure.

In this test, the “Firebird-1” verification platform was in a stable state during the flight, and all indicators met the design requirements, achieving a good technical assessment and verification effect. In the future, Galaxy Dynamics Aerospace will, on this basis, promote a series of key technology verification work including the recovery trajectory online planning algorithm as planned, accelerate the evolution of related technologies, and accelerate the development of reusable launch vehicles.  

The auxiliary power system of智神星一号 PALLAS ONE Reusable Carrier Rocket can provide force for the roll control of the active stage of the rocket flight, the three-channel attitude control of the taxiing section, the sinking of the propellant in the taxiing section, and the correction of the rocket’s terminal velocity. This test run has comprehensively examined the coordination of the components of the auxiliary power system and the correctness of the design scheme. The total system test run lasted for 1800s, and each attitude control engine had a cumulative pulse operation of more than 600 times, the shortest pulse was 30ms, and the single working time of the sinking engine was longer than 600s. The test procedure covers all flight conditions of the智神星一号 PALLAS ONE Reusable Carrier Rocket.

During the test run, 14 engines worked normally throughout the whole process, and the engine performance met the design index requirements. 智神星一号 PALLAS ONE Reusable Carrier Rocket auxiliary power system is independently developed by Galactic  Energy Galaxy Power Aerospace. The system consists of 62L metal diaphragm storage tank, 25L carbon fibre gas cylinder, 300N attitude control engine, 50N attitude control engine, pipeline valves and other components. The auxiliary power system has the advantages of light structure, compact layout, rapid response to pulse work, stable and reliable long-distance work, etc. Follow-up will also carry out vibration, separation and other identification environmental tests and reliability growth thermal test run assessment. The complete success of the hot test of the auxiliary power system has laid a solid foundation for the first flight delivery of the智神星一号 PALLAS ONE Reusable Carrier Rocket.

Images and visuals are from their respectives also Galactic Energy is located in Block D, Aviation Technology Plaza, E-Town, Beijing- China – People’s Republic of China

#MadeInChina #中國製造 #中國 |酒泉衛星發射中心#JiuquanSatelliteLaunchCenter #星河动力空间科技有限公司#GalacticEnergy #May2023| #CarrierRocketShopping #智神星一号 #PallasOne #CarrierRocket #ReusableCarrierRocket No. 1 liquid rocket assembly off the assembly line, first flight expected in the second half of next year

kevinjamesngLeave a comment

星河动力空间科技有限公司 Galactic Energy-  Galaxy Power (Beijing) Space Technology Co., Ltd. Located in Block D, Aviation Technology Plaza, E-Town, and Beijing – Beijing – China – People’s Republic of China ….Galaxy Aerospace is the first private aerospace company in China to achieve successful continuous launches, the first to send commercial networked satellites into a 500km sun-synchronous orbit, and the first to master the ability to launch multiple satellites with one carrier rocket.

On 17th May 2023 Galaxy Power PallasOne  No. 1 liquid rocket assembly off the assembly line, first flight expected in the second half of next year…..On That May 17, Anhui Xinghe Power Equipment Technology Co., Ltd. The first Chizhou-made “Zhishenxing No. 1” liquid carrier rocket was successfully assembled and rolled off the assembly line. So far, Chizhou’s commercial rockets have officially entered the industrialization.



It is reported that the “PallasOne No. 1″ liquid launch vehicle rolled off the assembly line this time has a total length of 52 meters, a diameter of 3.35 meters, a take-off weight of 257 tons, and a low-orbit carrying capacity of 5 tons. %—105% of the “Sky” liquid oxygen/kerosene engine. The multi-return vortex conical gas generator, coaxial double-suction turbo pump, and multi-functional integrated combined valve adopted by “Zhishenxing No. 1” are all domestically pioneered, and are also at the leading level at the international level.


Liu Baiqi, chairman of Anhui Xinghe Power Equipment Technology Co., Ltd., said: ” PallasOne  “can be reused through vertical recycling. Our goal is to achieve 50 times of reuse in the future, which can greatly reduce the launch cost of the rocket, and It can reduce the cost of constellation network construction.” “

The final assembly of the ‘ PallasOne  ‘ liquid rocket is off the assembly line, which indicates that the production base of the liquid rocket and engine of the Xinghe Power Chizhou project currently has an annual output of 20 liquid launch vehicles and 200 liquid rockets. The production capacity of the engine.” Liu Baiqi said that in the next step, the company will accelerate the industrialization of reusable liquid launch vehicles and contribute to the development of the commercial aerospace industry in Chizhou. “After the first liquid rocket comes off the production line, about 60 large-scale ground experiments will be completed in the follow-up, and the first flight is expected to take place in the second half of next year. “

Images and visuals are from their respectives 星河动力空间科技有限公司 Galactic Energy-  Galaxy Power (Beijing) Space Technology Co., Ltd.

#MadeInChina #中國製造 |#GalacticEnegry #星河动力#ReusableCarrierRocket | #Ceres1 #Pallas1 – A new Medium Carrier Rocket Company Satellite launcher market set to launch two satellites…

kevinjamesngLeave a comment

 

Currently these two years there’s been numerous of Chinese Private Space Companies that’s encompassing the Private Space Carrier Rocket market in which most are leading towards reusable carrier rockets in which there’s one in which will be testing there  newly design Carrier rocket with a live payload onboard launching in 2020 March.. In which launch two satellites from the Jiuquan Satellite Launch Center- Dongfeng Aerospace city in the Gobi Desert, Inner Mongolia – People’s Republic of China ….

At the moment, GalacticEnegry 星河动力, is in testing ground stages at the moment, with twenty large scale testing, in which the overall assemble of the carrier rocket with its integrated components will take shape in December 2019 production calendar of the CERES One Carrier Rocket. In most of the integration is based on the testing of interface adapters to be more accommodating also its adaptiveness towards various payloads…

 

GalacticEnegry 星河动力 -Ceres One Carrier Rocket is design to launch payloads into SSO orbital altitude of five hundred Kilometers above with a targeting orbit of ninety seven point four degrees orbital inclination……  as for the orbital payload delivery.. For the LEO – Low Earth Orbit – 200 Km- 350 Kilograms, SSO – Sun Synchronous Orbit – 700 Km – 230 Kilograms…

There’s second Carrier Rocket in development in which is the Reusable Carrier Rocket in which Carrier Rocket Pallas One, in which is a multiple staging Carrier Rocket in which comes in two stages the reusable Carrier rocket stage, with secondary stage as a delivery to orbit with landing units…  There are two launch payloads requirements for LEO-Low Earth Orbit – its four tonnes, for SSO –Sun Synchronous Orbit its two Tonnes …..