Tag: carrier rocket engine testing

#CNSA #ChinaNationalSpaceAdministration #国家航天局 |#BRI June2024 | #长征十号#ChangZheng10 #CZ10 #LongMarch10 the Next Generation Manned #LunarCarrierRocket successfully completed the test of the Three #YK100K  first-stage rocket power engine system…

kevinjamesngLeave a comment

On the 14th June 2024  CNSA _China National Space Administration -China – People’s Republic of China at a China Academy Of Launch Vehicle Technology  Engine Testing complex.. On June 14, the Long March 10 series rockets used for manned lunar landing and other missions successfully completed the test of the first-stage rocket power system. During the test, the engine started normally, worked stably, shut down at a fixed time, and all parameters were tested normally. This test is the first system-level large-scale ground test of the Long March 10 series of launch vehicles. The matching of the first-stage booster delivery system and the engine, the propellant filling process, the multi-machine parallel power transmission and environmental characteristics and other technologies were fully verified.

The Long March 10 rocket is a three-and-a-half-stage rocket developed for the manned lunar exploration project. The total length of the rocket is 92.5 meters, the takeoff weight is about 2,189 tons, the takeoff thrust is about 2,678 tons, and the Earth-Moon transfer orbit carrying capacity is not less than 27 tons. In the future, it will be used to launch a new generation of manned spacecraft and lunar landers. In addition, the Long March 10 has also designed another booster-free configuration that can perform space station astronaut and cargo transportation tasks….

The engine is the power source of the rocket, and its development process is very complicated. Test run is an important link in the engine development process, and there are dozens of types. In layman’s terms, engine test run is the process of igniting the engine and verifying the rationality of its design scheme and process reliability. This is an indispensable and important part of the development and delivery of a type 1 engine. It will run through all stages before and after engine development. Each stage of test run has different meanings, and the ignition time varies from a few seconds to hundreds of seconds.

It is reported that the engine used in this test run uses advanced liquid oxygen kerosene as fuel, which is improved and iterated from the high-thrust liquid oxygen kerosene engine used by the new generation of launch vehicles such as the Long March 5. The thrust reaches 130 tons. The R&D team of the Sixth Academy of Aerospace Science and Technology Group adheres to the concept of digital design, and has successively overcome key technical problems such as engine start-up and shutdown sequence, engine wide-range continuously variable thrust, and engine long life and high reliability.

In addition, the continuous success of the test run has fully verified the reliability of a number of new carrying process technologies. The engine production of this test run adopts the concept of intelligent manufacturing, and actively applies new materials, new processes, and new technologies. The inner wall of the thrust chamber of the core component adopts a new protective coating, key assemblies adopt automatic welding technology, and a large number of components adopt 3D printing technology.

During the preparation of the engine test run, the participants in the research and test conducted tests and verifications on each subsystem of the test through comprehensive means such as digital modelling, simulation calculation, and system debugging. The successful test run shows that the test area has greatly improved the multi-station parallel test run capability and test efficiency by optimizing the workflow.

Images and visuals are from their Respectives CMS China Manned SpaceCNSA-China National Space Administration  the Sixth Academy of Aerospace Science and Technology Group

#MadeInChina #中國製造 |#深蓝航天 #LANDSPACE #DeepBlueLimitedCompany #April2024| Deep Blue Aerospace #ReusableCarrierRocket – The #TQ15A test run of the largest niobium alloy nozzle in China successfully welcomed the flight of the Suzaku rocket #ASummary

kevinjamesngLeave a comment

深蓝航天  Deep Blue Limited – Deep Blue Aerospace  Landspace One of sixty Chinese private space Carrier Rocket Companies in China-People’s Republic of China…  As many of sixty plus Private Rocket Deep Blue Aerospace Co., Ltd. was established in 2017. The company is mainly a high-tech aerospace enterprise that focuses on the direction of liquid recovery and reusable launch vehicles and provides users with commercial launch services. Deep Blue Aerospace Co., Ltd. is headquartered in Nantong City, Jiangsu Province. At the same time, the company has rocket general and liquid engine R&D centers in Yizhuang, Beijing and Xi’an, Shaanxi, respectively, and a rocket power system test base in Tongchuan, Shaanxi…..

Recently on the Month of April 2024, Blue Arrow Aerospace successfully completed the engine test run assessment of the largest niobium alloy nozzle in China at the Huzhou Hot Test Center. After the test, the product structure and surface coating were intact. The engine worked for 380 seconds under rated working conditions and high working conditions. The structural reliability, thermal protection reliability, and process reliability of the niobium alloy nozzle passed the assessment! This niobium alloy nozzle has a diameter of about 1.6m and a height of about 1.3m. The size is much larger than the existing domestic products of the same type. It is equipped with the Tianque 15A (TQ-15A) vacuum liquid oxygen methane engine with the highest thrust in China.

The test run of the largest niobium alloy nozzle in China successfully welcomed the flight of the Suzaku rocket


🔷 Recently, Blue Arrow Aerospace successfully completed the engine test run assessment of the largest niobium alloy nozzle in the country at the Huzhou Thermal Test Center. After the test, the product structure and surface coating were intact. The engine worked for 380 seconds under rated working conditions and high working conditions. The structural reliability, thermal protection reliability, and process reliability of the niobium alloy nozzle passed the assessment!


🔷This niobium alloy nozzle has a diameter of about 1.6m and a height of about 1.3m. The size is much larger than the existing domestic products of the same type. It is equipped with the Tianque 15A (TQ-15A), the vacuum liquid oxygen methane engine with the highest thrust in China, with a vacuum thrust of 836kN. , vacuum specific impulse 3320m/s.


🔷The Blue Arrow aerospace engine team has begun to develop a niobium alloy nozzle with a larger area ratio. The outlet diameter will reach 2.5m, which will continue to improve the vacuum specific impulse of the rocket’s secondary main engine.

Images and visuals are from their Respectives.

#MadeInChina #中國製造 #ExPace | #January2024 #CASIC Rocket Technology Company #Expace #PrivateChineseSpaceCompany #Wuhan #CarrierRocketCompany #CarrierRocket #ReusableCarrierRocket  #Kuaizhou  #KX Launches successfully testing take-off and landing.

kevinjamesngLeave a comment

On the 26th January 2024 1500 Hong Kong SAR- Beijing Time, on the afternoon of, the first vertical take-off and landing test of the Kuaizhou rocket’s reusable technology test rocket by China, People’s Republic of中國製造 Expace Technology Corporation,  China Aerospace Science and Industry Corporation’s Aerospace Sanjiang Rocket Company was a complete success.

This test uses a 10-ton liquid oxygen methane engine independently developed by the rocket company. The flight time is 22 seconds, the hovering time is 9 seconds, and the hovering height accuracy is 0.15m. The landing attitude of the test arrow is stable, the landing position is accurate, and the rocket body is in good condition. The test mission A complete success. The success of this test laid a solid foundation for the development of the Kuaizhou series of reusable liquid oxygen methane launch vehicle…

The test arrow has a stable landing posture, accurate landing position, and the rocket body is in good condition. The test mission has been achieved A complete success The success of this test laid a solid foundation for the development of the Kuaizhou series of reusable liquid oxygen methane launch vehicles.

Images and visuals are from a their respectives..

#MadeInChina #中國製造 |#深蓝航天 #LANDSPACE #DeepBlueLimitedCompany #January 2024| Deep Blue Aerospace #ReusableCarrierRocket #朱雀三号#Zhuque3 #Suzaku3 #CarrierRocket stainless steel launch vehicle – Summary

kevinjamesngLeave a comment

深蓝航天  Deep Blue Limited – Deep Blue Aerospace  Landspace One of sixty Chinese private space Carrier Rocket Companies in China-People’s Republic of China…  As many of sixty plus Private Rocket Deep Blue Aerospace Co., Ltd. was established in 2017. The company is mainly a high-tech aerospace enterprise that focuses on the direction of liquid recovery and reusable launch vehicles and provides users with commercial launch services. Deep Blue Aerospace Co., Ltd. is headquartered in Nantong City, Jiangsu Province. At the same time, the company has rocket general and liquid engine R&D centers in Yizhuang, Beijing and Xi’an, Shaanxi, respectively, and a rocket power system test base in Tongchuan, Shaanxi…..

This afternoon on the 19th January 2024, Beijing time, the Landspace – Blue Arrow Aerospace Zhuque 3 VTVL-1 reusable vertical take-off and landing verification rocket conducted its first flight test today at the Jiuquan Satellite Launch Center, China, People’s Republic of China. The flight lasted about 60 seconds and the flight altitude was about 350 meters.

 During 16:00 Beijing Time  on January 19th , 2024, the Zhuque-3 VTVL-1 reusable vertical takeoff and landing recovery verification rocket (hereinafter referred to as the “VTVL-1 test rocket”) independently developed by Blue Arrow Aerospace was ignited and launched into space at the Jiuquan Satellite Launch Center in my country. . The flight time of this test was about 60 seconds, the flight height was about 350m, and the landing position accuracy was about 2.4m. The rocket landed smoothly, the landing point was accurate, and it was in good condition. The test mission was a complete success!

China, People’s Republic of China’s first stainless steel rocket – LandSpace Blue Arrow Aerospace’s reusable liquid oxygen methane rocket Zhuque 3!


🔷The Zhuque-3 reusable liquid oxygen methane launch vehicle is the latest product in the Blue Arrow space launch vehicle series. The diameter of the rocket body is 4.5m, the fairing diameter is 5.2m, the total length of the rocket is 76.6m, the take-off mass is about 660t, and the take-off thrust is about 900t.


🔷The power system adopts the Tianque series liquid oxygen methane engines independently developed by Blue Arrow Aerospace. Among them, the first sub-stage is equipped with 9 Tianque 12B (TQ-12B) engines with a sea level thrust of 1000kN; the second sub-stage is equipped with 1 TQ-12B engine with a vacuum thrust of 1183kN. Magpie 15B (TQ-15B) vacuum engine has a vacuum specific impulse of 3500m/s.


🔷Considering that the first stage can be reused, the entire arrow is equipped with 4 sets of retractable grid rudders as aerodynamic control surfaces for attitude adjustment and landing point control of the aerodynamic deceleration section of the first stage; landing legs are installed on the tail to achieve a Vertical landing during sub-stage recovery.


🔷The first sub-stage of Zhuque 3 is designed to be reused no less than 20 times. The low-orbit carrying capacity for one-time missions can reach 21.3t, and the recovery mission in the navigation area is 18.3t. It has the capability of multiple satellites with one arrow and flat-plate stacking satellite group shooting. The capability fully covers the launch needs of most payloads on the market such as LEO, SSO, GTO and other different orbits. After being put into commercial operation, it will greatly improve the networking efficiency of satellite Internet constellations.


🔷The Zhuque-3 rocket is China’s first stainless steel liquid launch vehicle, which can significantly reduce the manufacturing cost of the rocket and shorten the production cycle. Its high temperature resistance has obvious advantages in the rocket’s multiple returns and reuse. In addition, due to the low cost of liquid oxygen methane, the methane engine’s non-carbon deposits, easy maintenance, and full life cycle monitoring properties, the first-stage engine of the Suzaku-3 rocket can be inspected without lowering the arrow after the rocket is recovered, and can be refilled after refueling. flight, achieving true flight operations, and the launch cost can be reduced by 80-90% compared with disposable rockets. (Landspace – Blue Arrow Aerospace)

Images and visuals are from their Respectives.

#MadeInChina #中國製造 |#深蓝航天 #LANDSPACE #DeepBlueLimitedCompany #January 2024| Deep Blue Aerospace #ReusableCarrierRocket #朱雀三号#Zhuque3 #Suzaku3″ #CarrierRocket stainless steel launch vehicle VTVL-1 reusable vertical take-off and landing verification

kevinjamesngLeave a comment

深蓝航天  Deep Blue Limited – Deep Blue Aerospace  Landspace One of sixty Chinese private space Carrier Rocket Companies in China-People’s Republic of China…  As many of sixty plus Private Rocket Deep Blue Aerospace Co., Ltd. was established in 2017. The company is mainly a high-tech aerospace enterprise that focuses on the direction of liquid recovery and reusable launch vehicles and provides users with commercial launch services. Deep Blue Aerospace Co., Ltd. is headquartered in Nantong City, Jiangsu Province. At the same time, the company has rocket general and liquid engine R&D centers in Yizhuang, Beijing and Xi’an, Shaanxi, respectively, and a rocket power system test base in Tongchuan, Shaanxi…..

This afternoon on the 19th January 2024, Beijing time, the Landspace – Blue Arrow Aerospace Zhuque 3 VTVL-1 reusable vertical take-off and landing verification rocket conducted its first flight test today at the Jiuquan Satellite Launch Center. The flight lasted about 60 seconds and the flight altitude was about 350 meters.

 During 16:00 Beijing Time  on January 19th , 2024, the Zhuque-3 VTVL-1 reusable vertical takeoff and landing recovery verification rocket (hereinafter referred to as the “VTVL-1 test rocket”) independently developed by Blue Arrow Aerospace was ignited and launched into space at the Jiuquan Satellite Launch Center in my country. . The flight time of this test was about 60 seconds, the flight height was about 350m, and the landing position accuracy was about 2.4m. The rocket landed smoothly, the landing point was accurate, and it was in good condition. The test mission was a complete success!

The flight time of Blue Arrow’s grasshopper jump test is about 60 seconds, the flight height is about 350m, the landing position accuracy is 2.4m, the landing speed is 0.75m/s, the landing attitude angle is about 0.14°, and the rolling angle is about 4.4°.

The material of the rocket tank is stainless steel , with a diameter of 3.35 meters, uses a modified TQ-12 transmitter with multiple starts and depth variable thrust capabilities.

The flight time of this test is about 60 seconds, the flight height is about 350m, the landing position accuracy is 2.4m, the landing speed is 0.75m/s, the landing attitude angle is about 0.14°, and the roll angle is about 4.4°.

[The Zhuque-3 reusable rocket successfully completed its first large-scale vertical take-off and landing test]

This afternoon, the Zhuque-3 reusable vertical take-off and landing recovery verification rocket was ignited and lifted off at the Jiuquan Satellite Launch Center in my country. The rocket then landed smoothly and the test mission was achieved. success. The take-off mass of the test arrow in this test flight is about 50.3 tons, and the maximum take-off mass of the entire arrow can reach 68 tons. It is currently the largest vertical take-off and landing test arrow in China, People’s Republic of China. .

Images and visuals are from their Respectives.