KevinJamesNg

Traveling through time and space & Doing timey wimy stuff.

 

During this week weekend also its prior  of 17th November 2020  Today it was the roll out At eight o’clock today, the Long March 5 Yao carrier rocket completed the related work in the technical zone at the Wenchang Space Launch Site in China and was vertically transferred to the 101 launch station. It is planned to launch the Chang’e 5 in the early morning of November 24th 2020 of in which it has been a very busy week for the crew at the Wenchang Spacecraft launch center –Hainan Province – China- People’s Republic of China.. in which it’s finally assembled the Long March 8-Chang Zheng 8 Carrier Rocket in which it’s a testing case for a  55 meter tall long Reusable Carrier Rocket.. in which is currently fully staging on the its’ launch platform in the moment of testing..  Current at the moment it’s the Long March 5-Y5  in the process been assembled for the CNSA – China National Space Administration CLEP – China Lunar Exploration Program Belt and Road Initiative… On the return collection sample on the Mons Rumker section of Earth’s Moon Luna-Chang’e…

This slideshow requires JavaScript.

In which during at the same time. and the Chang’e-5 probe completed the assembly and testing of the technical zone at the Wenchang Space Launch Site in China, and were transferred vertically to the launch area. They are scheduled to launch in late November. Later, after completing the rocket function inspection and joint testing and confirming the final state, the rocket will be filled with propellant and launch according to the procedure.

This slideshow requires JavaScript.

The lunar exploration project Chang’e-5 mission is the sixth mission of China’s lunar exploration project. It is planned to realize automatic sampling and return of the lunar surface to help deepen scientific research on the origin and evolution of the moon. It is one of the most complex and difficult missions in my country’s aerospace industry so far.

Previously On 11th September 2020  Friday early morning in one of China- People’s Republic of China’s more than three thousand year old Ultra Mega innovative Industrial Megatroplis City.. In which today this morning transporting towards the Tianjin Port is from CAST- China Academy of Sciences Technology Carrier rocket Factory city is the parts of the Long March Five – Chang Zheng Five Yao five variant series … of the CNSA- China National Space Administration Belt and Road Lunar mission on the Southern pole of the Earth’s Moon…

 

In previously The Long March 5 Yaowu carrier rocket was safely transported by the Yuanwang transport fleet to Qinglan Port, Wenchang, and Hainan in late September, and was transported to Wenchang Space Launch Site in China in stages by road transportation. Since then, the rocket has successively completed various preparations such as final assembly and testing in accordance with the test launch process. The Parts of the CNSA Long March 5 Chang Zheng 5 Yao 5 Carrier Rocket was transported towards the Tianjin Port in which it was hoisted on the CNSA’s Carrier Rocket transport ship the Yuanawang …. In which it’ll makes it way traveling towards Wenchang Spacecraft Launch Center in Hainan Province – China-PROC.. In following which will be assembled to ready to launch the Belt and Road Initiative Lunar Change5 return sample planned landing zone is Mons Rumker in Oceanus Procellarum, located in the northwest region of the near side of the Moon…… The location is a large, elevated volcanic mound 70 km in diameter that features a strong spectroscopic signature of basaltic lunar mare material.

The mission is reported to consist of four modules or elements: the lander would collect about 2 kg of samples from 2 metres below the surface and place them in an attached ascent vehicle that will be launched into lunar orbit. The ascent vehicle will make an automatic rendezvous and docking with an orbiter that would transfer the samples into a sample-return capsule for their delivery to Earth…. Change5 lunar lander equipment payload composite off…. The lander will carry landing cameras, a panoramic camera, a spectrometer to determine mineral composition, a soil gas analytical instrument, a soil composition analytical instrument, a sampling sectional thermo-detector, and a ground-penetrating radar…….. For acquiring samples, it will be equipped with a robotic arm, a rotary-percussive drill, a scoop for sampling, and separation tubes to isolate individual samples……

 Images and visuals are from Weibo..

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: